Installation method of wooden floor universal buckle flat buckle floor

There are many ways to lay the foundation for the universal buckle of wooden floor. When decorating a house, we must pay attention to choosing the right floor in order to better improve the indoor decoration effect. Wooden floor universal buckle flat buckle floor is a common laying method, so what is the installation method of flat buckle floor? In view of these problems, let's first look at a small part of the relevant introduction and analysis.

Floor installation method of general flat keel laying method for wooden floor

? Scope of application of flat-bottomed keel paving: keel paving method is suitable for solid wood flooring and solid wood composite flooring. The bending strength of the ground is enough, and keel pavement can be used.

Advantages and disadvantages of flat-buckle keel pavement: it is widely used and suitable for ground walls. It helps to prevent the ground from being wet and can be used in high humidity areas. However, due to the need to lay the keel, the construction period is slightly longer, and the ground needs a certain bending strength.

Wooden floor universal buckle flat buckle floor keel laying method: first lay the keel, then lay the floor, the ground height difference is too large, and smooth the wood with a mattress. Between the keel, the keel is fixed on the ground by hammering or nailing. The distance between the keel and the wall or other ground materials is 8- 12mm. After the keel is placed, check whether it is stable and firm. The keel can only be put through the back floor. When paving the floor, a space of more than 8 mm should be reserved between the floor and the wall. According to local conditions, water content and material conditions of products, expansion joints between floors are reserved. In dry areas, natural compaction is usually adopted between floors.

Installation method of universal flat buckle lifting pavement for wooden floor

? Scope of application: suspension pavement is suitable for all kinds of connectors, such as mouth floor, double-mouth floor and solid wood floor. Generally speaking, the bottom plate of ten grooves is more important, and the seam of the bottom plate is smaller.

Advantages and disadvantages of universal flat buckle paving for wooden floors: simple paving process, short construction period, less pollution and convenient maintenance; The floor is not easy to arch, and the tiles are not easy to deform; The floor is seamless or partially damaged, which is convenient for maintenance and replacement. This floor gets wet easily. ?

Wooden floor universal buckle flat buckle floor hanging paving method: the ground should be flat, dry and clean. If the building or bungalow is underground, it must be waterproof. The floor must be cleaned before laying. The upper layer can be covered with 3mm thick plastic film foam pad or 10- 12mm thick pad. Joints are laid and sealed well. You can also use 9- 18mm thick high-quality plywood. It is fixed on the ground and must be firmly nailed to it. The gap between plates should be kept at 3-6 mm and sealed with adhesive tape.

Appropriate floor can also bring comfort to people's lives, and it is more likely to avoid many unnecessary problems in the future. In fact, the installation method of flat floor is relatively simple. If you are not particularly familiar with it, it is recommended to find a professional floor paving master for construction, which can improve the interior decoration.