How to clean the floor heating pipe floor heating pipe cleaning method to share

1, first of all close all the valves;

2, open the return end of the screw plug, pay attention to a small amount of water out, it is okay to advance a little bit of towel and so on;

3, the following is ready to catch the bottle of water, the place is too narrow to be a beverage bottle, the bottom side of the open a rectangular hole;

4, open the 5 water inlet pipe one of the valves;

5, the following slow open the total inlet valve, pay attention to the total return valve does not move, the basin fast and slow on the shutdown, pouring in the continued rinse, until the water becomes clear on the line, rinse this article in the closure of it, in turn, open the other tube rinse, so that the purpose is the pressure is large, can be hidden things flushed out;

6, see if it is very dirty, and so the dirty water is discharged out slowly;

7, seems to be cleaner a little bit of ah, no! Continue, to completely see the water;

8, the last to screw on the removed screw plug, fully open the valve is completed;

9, small valve should also be tightened, and finally cleaned well.