How to diy simple handicraft method illustration

New small invention making method 1, homemade badminton

Preparation materials: an empty beverage bottle, two foam fruit net sets, a rubber band, a glass bullet.

Process:

1. Take an empty 250 ml beverage bottle, cut off the top half of the bottle;

2. The cut off part is divided into eight parts, cut with scissors to the neck of the bottle, and then, each cut into the same size of each petal shape;

3. Foam fruit mesh cover outside the bottle, fixed with rubber bands at the mouth of the bottle;

4. Wrap another foam fruit net cover around a glass bullet, stuff it into the mouth of the bottle, stuff it tightly and expose it for about 1 centimeter;

5. Cut off half of a ping pong ball, cover the bottom of the hemisphere over the mouth of the bottle, cut the four edges into whiskers, cover the mouth of the bottle and then fasten it with a rubber band.

6. Beautify the finishing touches, a homemade badminton completed. Play with a badminton racket, see how the effect?

2, homemade soap paper

Materials and tools:

Moisture-absorbent white paper, a small piece of soap, a brush and disposable beverage cans.

Methods:

First, the soap is chopped and placed in the can, the right amount of water and put the cup on the stove to heat up the soap melting, cut the white paper into a matchbox size, one coated with soap, and then take out the drying of the soap paper.

3, homemade hot air balloons

1. First we cut out 6 to 8 leaf-shaped pieces of soft paper.

2. Fold them in half and glue their edges together to make a balloon.

3. Tape four strings to the bottom of the balloon. Use playdough to attach the other end of the strings to the table.

4. Turn the hairdryer on as slow as possible. Point the mouth of the hairdryer upwards towards the opening at the bottom and turn the switch on. The balloon will slowly grow in size and pull the cord tight and off the table.

4, homemade flashlight

Specific production methods are: a waste cans (such as Lulu beverage cans) up off one end of the lid, the other end of the round hammer knocked concave. Use thick corrugated cardboard to roll up two one battery, battery positive pole up, negative pole down into the can. Find a suitable plastic lid (e.g., a magical large rolled box lid will snap right onto the Lulu beverage can), and dig a small round hole in the center of the lid, the size of which is appropriate to allow the light bulb to be inserted tightly. Insert the bulb base into the hole. Take a piece of wire and strip the ends of the wire, wrap one end around the base of the bulb, and pierce the other end through a small hole in the side of the plastic lid. Place the plastic cover over the can. Check to see that the bulb and battery are not in close contact. Here the disposable flashlight is ready. When using, use your thumb to put from the side wall through the wire pressed from the cans without paint on the weld, the flashlight will glow, thumb away from the wire jumped up, the flashlight will go out, the use of very convenient.

5, homemade solar cooker

Find a large flashlight on the concave reflective bowl, with rigid foam or wood to cut a cylinder about 4 centimeters long, the diameter of the reflective bowl can be tightly plugged into the round hole appropriate. At one end of the cylinder transversely drilled a fine hole, threaded into a diameter equal to the hole diameter of the wire, and then exposed in the cylinder outside the wire ends wrench folded into 90 °, each left 5 cm can be. Plug the cylinder into the round hole of the reflective bowl, and then insert the ends of the wire into a piece of Styrofoam or wooden base plate. Sharpen the ends of a thin bamboo skewer and insert one end into the cylinder in the center of the reflecting bowl and the other end into a small piece of potato. Place the device in the sun so that the reflective bowl is facing the direction of the sun, and then, patiently adjust the length of the bamboo skewer so that the inserted potato sits right on the glowing focal point. In no time at all, the potato will be cooked by the sun's rays and emit flavor.

6, homemade colored candles

Materials: colored crayons, wax

Methods:

1. Find a discarded canned drinks barrel (such as 1.25-liter Coke bottles), neatly cut off the lid of the part of the wax chipped into the barrel.

2. Put the bucket in hot water and stir the wax inside to melt it all. It's best to use boiling water. But ask your parents for help or do this step under their supervision.

3. Pour the melted liquid into a nicely shaped container (such as a heart-shaped box with small pieces of choconai). Don't pour too much. As for why, read on. Of course, you'll want to put the thread for the wick in the container first.

4. When the original wax has cooled, pour in the melted colored crayon liquid (colored crayons come in handy here) as you did on the other side. In this way, the different colors of wax layer by layer to add, good-looking candle is made.

7, homemade wall hanging baskets

Materials and tools: two Sprite bottles, glue, carving knife, scissors.

Methods:

1. Remove the green bottom set of a Sprite bottle, cut it into a lotus shape, turn it down and glue the bottle into a base.

2. In the green bottom set intercepted 2 cm wide green ring, still set on the bottle.

3. Remove the neck of the bottle, cut out a 13 cm long and 8 centimeters wide wide band on the bottle, and a number of 3 cm wide narrow band.

4. Use a carving knife to carve a pattern on the 3 cm narrow strips