Scrap cardboard boxes can be turned into what creative things crafts

1.DIY Compact Jewelry BoxFirst we find an ordinary cardboard box. Then cut off the lid at one end. Find a piece of cardboard with similar hardness, in accordance with the length, width and height of the paper box just to make the shape of a drawer, to be smaller than the size of the sum of the number one, the collective small how much depends on the thickness of the cardboard, I have this thicker, so narrowed down 0.5 cm. Just like when I was a child craft class to do, in the place where you need to glue to leave an edge for gluing.

(Red is the length, blue is the width, green is the height) and then cut out the drawing, in the need to fold the place with a knife to gently scratch, gently scratch, so that when up will not be difficult. Then fold it and then glued, if the glue does not stick can use transparent tape, the most important thing is that it must be strong. And then put the good carton into the box before the good box is the shape of a drawer. Then use wrapping paper to wrap the exposed part of the box, if you have the patience, you can also use cloth. Just like when you were a child, wrap it like a book cover, how beautiful how to wrap. The rough shape of the drawer will come out. Then come to do the drawer handle, in the drawer face with an awl to make two holes, can be a little bigger. Thread a piece of string or ribbon through it and tie it in a tight knot inside the drawer. Then use tape to glue the knot you just made to the tied knot. The drawer is now complete! If you don't think it's pretty enough, you can add more decorations. Decorations and so on can be played as you wish. Such a small box can contain some jewelry and other small things. You can also do a good job of several small drawers put together to make a small cabinet. 2. Cookie box into a jewelry box eaten out of the moon cake box or cookie box, the use of spacing inside can be used to store jewelry, such as earrings, necklaces, etc., both at a glance, but also easy to take. 3. CD box to make a romantic light box to implement the environmental protection we want to physically, this issue to teach you how to use the old CD box to make a romantic light box.

Warm-up action: everyone to check the drawer, and even pots and pans pots and pans, there is no longer used the old CD box. Congratulations to the litterbugs who found the boxes, you can move on to the next step. For those who didn't find any, keep looking or ask the generous old three and four next door for some.

Preparation tools: In addition to the CD box, you will need a carving knife or scissors, a ruler, packing tape, decorative drawing paper (or photos of a certain size if you want to make a photo frame), a hot melt gun and a hot melt agent

Step1: First, cut the decorative drawing paper (or photos) that you have prepared according to the size of the cover of the CD box.

Step2: Embed the cut pieces of paper into the face of the CD box to make it look like the back and front cover of the original CD. Then see the picture above, the two boxes stand up against each other, four interfaces are glued with hot melt, to be able to make it fixed after the glue is dry.

Step3: Use glue and packing tape to decorate the top edge of the box.

Step4: Then decorate the measuring edge. Use a piece of packing tape long enough to go around the light box without cutting it off. Pay attention to the corners and use more glue to fix it, and at the same time, the long part of the packing tape from step3 is pressed underneath, which is beautiful and strong.

Finally, enjoytime: put a candle holder inside, turn off the lights and light the candles, romantic~