Help me translate the English of this microelectronics, thank you. Plus points if it's good.

Due to the influence of some production process characteristics, it is difficult to accurately estimate the MOSFET (before mass production). In practice, it is usually to cure a specific manufacturing process, select samples from mass production products and measure them to get MOSFET.

The measurement method of Mosfet is to compare the volt-ampere characteristic curve measured by the sample with the theoretical calculation value. First, according to Equations 6 and 27, the leakage current of the unsaturated section above the threshold value conforms to Equation (Equation is abbreviated). The model established by Formula 7. 1 has included the influence of horizontal and vertical segments (i.e. accelerated saturation). When Vds is small enough, the saturation acceleration can be ignored, so the formula 7. 1 can be approximately treated as (the formula is abbreviated).