Installation steps of glass shower room How to prevent the glass door of shower room from exploding?

In the bathroom decoration, most families choose the form of dry and wet separation, so that the two functions of shower and washing are less disturbing. Glass shower rooms are made of many materials. On the one hand, glass has good light transmission and will not affect lighting. On the other hand, glass is easy to take care of. Today, we will learn about the installation steps of the glass shower room and how the glass door of the shower room is explosion-proof.

Installation steps of glass shower room

1, ready to use the necessary tools.

2. Install the bottom basin: assemble all parts of the bottom basin, adjust the level of the bottom basin, and ensure that there is no water in the basin and the bottom of the basin. The hose can expand and contract with the distance to firmly connect the basin bottom with the floor drain.

3. Testing and protection: After installation, water testing is required to ensure smooth launch. 4. Positioning drilling: use pencil and level to determine the position of drilling aluminum against the wall, and use impact drill to drill holes.

4. Installation of aluminum: Knock rubber particles into the drill hole and lock the aluminum bar on the wall with screws.

5. Fixing the glass: clamp the glass in the drilling hole of the bottom basin and lock it, and then fix it with screws.

6. Installation of pipe jacking: find the corresponding position above the fixed glass, install (straight/oblique) fixed seats and connect the pipe jacking. Fix it on the top of the glass with an elbow sleeve.

7. Installation of the shelf: Install the shelf in an accurate position, tighten the laminated nut, and fix the laminated glass to keep it vertical and horizontal. Pay attention to waterproof under the aluminum material that fixes the glass.

8. Installation of movable doors: Install movable door hardware, and install hinges at the reserved holes of fixed doors. After installation, adjust the position of the lotus leaf shaft core until the door feels best.

9. Waterproof: Install water-absorbing strips or water-blocking strips on the side or under the glass as required. Seal the joints between aluminum and walls, glass and bottom basin with silicone gel.

10, debugging and fastening: check whether all components are comfortable and smooth to use, and adjust them in time when problems are found. After adjustment, tighten the corresponding screws to make the whole shower room more firm.

1 1, finishing work: clip the decorative aluminum strip into the wall-hanging aluminum to ensure its neat and elegant appearance. Finally, the whole shower room needs to be wiped clean with a rag.

How to explosion-proof the glass door of shower room

1, stick explosion-proof membrane.

Although the shower room glass is in danger of self-explosion, it does not mean that consumers have no way to reduce its harm. I believe everyone has seen the broken windshield of a car. The glass didn't fly around, but was fixed on a piece of film. This method is also applicable to the glass clip in the shower room. After sticking this explosion-proof film, glass slag can be prevented from flying everywhere, and the harm of glass to human body is fundamentally reduced. The high-quality tempered glass in the shower room can maintain its original glass shape even if it is broken after sticking the film.

However, the choice of explosion-proof membrane should be cautious. Be sure to choose an explosion-proof film that is qualified to produce safety films through the International Window Film Association. This is mainly because some inferior membranes with PVC as the main component not only can't play any protective role in accidents, but also contain toxic substances. Long-term use will not only cause chronic damage to glass, but also endanger people's physical and mental health.

2. Rinse with hot water before use.

In order to reduce the possibility of self-explosion of the whole shower room, consumers can rinse the glass door with hot water for five minutes before use, and then continue to use it to ensure foolproof. Of course, it is worth noting that tempered glass products that have self-explosion are not necessarily fake and shoddy products, and they are more likely to cause self-explosion when they are cold or hot or under the action of external forces. There are many reasons for self-explosion, including the glass itself, which may be caused by glass damage during installation.