TV how to connect to the network cable to watch TV (TV set connected to the cable network steps)

Some houses in the renovation, from the weak box to the living room TV position, only a pre-buried network cable, and now watch TV, you need to optical cat's IPTV port and set-top box connected to the set-top box before you can do, although nowadays the young people watch TV frequency is very little very little, but the old man in the house to watch TV ah.

If the pre-built network cable, used to connect with the set-top box, the TV can be watched, but can not external router, this Internet problem how to organize, although there are 4G and 5G, but at home, who do not want to pursue a more stable, faster Wi-Fi? Today we will share with you several ways to make the living room of this network cable, both to meet the needs of watching TV, but also to meet the needs of the Internet.

1, the cable is divided into 2

The pre-buried 8-core cable is divided into 2, respectively, connected to two crystal heads, a connection to the wireless router to access the Internet, a connection to the set-top box used to watch TV, this method is the simplest, the cost of the least investment, but this way there is a big drawback, that is, it can only run 100M, if the home is more than 100M broadband, it would be a waste of money, this is only your own balance of loss and gain, but also a lot of money. This is only yourselves to balance the gains and losses.

▲1 divided into two cables

2, replace the equipment, technology empowerment

Customer demand, is our demand, in order to realize the fish and the bear can be both, Flying Fish Star whole-house Wi-Fi coverage suite of IPTV convergence function, you can make the pre-buried this cable, synchronous transmission of Wi-Fi data and IPTV data, to do the Internet, watching TV, and so on. There are no disadvantages and no impact on the internet speed. Meanwhile, the set consists of 1 smart PoE gateway and multiple panel APs, so if there is a blind spot of Wi-Fi coverage at home, it can be solved together.

▲Set networking diagram

And the connection between the devices is very simple, the optical cat IPTV port connects to the router's WAN2 port, the pre-built network cable connects to the panel AP uplink port, and then the panel AP downlink port connects to the set-top box and the set-top box is finished.

▲Device connection diagram

In addition, the configuration is also very simple, but after completing the configuration of the external network to save, be sure to reboot, otherwise the configuration can not take effect.

▲Basic Configuration-Extranet Configuration

▲Type Selection-IPTV

▲AC Configuration-AP Management

▲IPTV Settings, Enable IPTV

3, and then a network cable

See if you can pull a pre-built cable at home, and see if the pre-built cable's pipe is big enough, and if you can easily pull it. Tube space is also large, can fit two cables, and then pull a cable is a good way, but it is recommended not to do it yourself, it is best to find the operator's technical staff or friends who know how to help solve the problem, the cost does not cost much.