Solution of using wire group before hitting rod

The schematic diagram of the use of the striker front group is as follows:

1, the material is pre-thread, fish wheel cover and scissors. Fold the pole line directly and wrap it for three or four times to tie a knot.

2. If there is no problem in the next step, continue to tighten the winding end with the back.

3. After the above operations are finished, you need to cut off the extra thread with scissors.

4. In this way, the illustrated assembly result will be obtained on the fish wheel set, and the purpose can be achieved.

Before hitting the pole, the conductor ring has two purposes:

1. Take your length of 4.9 as an example. After the wheel line is pulled out, use the horseshoe buckle and use the fishing rod below 3.6 to make the finished fishing tackle. The finished fishing tackle and the wheel line are connected with red tassels slightly above the handle. The binding method is the same as the method of connecting the hand lever.

The advantage is that the rod will not be slightly broken due to line winding, and it is not limited by the water depth of the fishing point. Of course, since the wild library has gone to the big fish, we can also solve this problem comprehensively. The other is to throw away a bunch of space beans at a time.

2. It is best to cooperate with fishing boats. The rock fishing rod itself is heavier than the hand rod and has a steel wire ring. If the wire group is tied to the rod, it is very laborious to use and it is easy to entangle the wire.

The advantage of rock fishing rod is that it can be thrown far and walked easily, especially after catching big fish, you can use the unloading force of fishing wheel and the toughness of fishing rod to walk together. After reaching a certain level, cut it, and install space beans, floating seats, lead seats, eight-character rings and so on on the main line in turn.