How to install electric hoist collector

How to install electric hoist, today I mainly explain the installation method of electric hoist:

1, the electric hoist is hoisted by split machine and assembled and installed on the beam.

2. Before installing the electric hoist, the tracks should be strictly parallel and on the same horizontal plane.

3. Before installation, carefully count the parts of electric hoist according to the packing list and check them carefully. Check the work record file.

4. Before installation, relevant personnel shall be arranged to discuss the drawings carefully and solve the deformation and defects caused by improper transportation and storage according to the skill requirements.

5. During lifting, there must be at least two lifting points. The lifting point is set in the symmetrical direction of the center of gravity of the equipment, which requires sufficient rigidity. There should be stow-wood at the lifting point, and the binding should be given priority to with walking wheels or main beams, and try to choose at both ends of the bridge.

6. First, lift the walking trolley, fix it on one side of the trolley track, and fix it firmly.

7. When the electric hoist is hoisted in place, after hoisting to a certain height, assemble the backpack on the electric hoist according to the requirements of drawing planning, and then hoist all the hoists in place.

8. When installing, it is advisable to cut off the hook first for transportation.

9. When assembling the electric hoist, take the bolt hole of the end beam as the positioning benchmark, and all the connecting plates are assembled to the equipment according to the factory number, and the orientation shall not be changed at will. Tighten the high-strength bolt with a torque wrench according to the planned torque value.

10. After the electric chain hoist is finally installed, the dynamic load test is needed, and the hoisting operation can only be started after there is no problem.

Tip: When installing the electric hoist, it may cause serious damage to the electric hoist if it is operated under inappropriate voltage. In order to prevent this, it is necessary to ensure that the wiring meets the requirements of the required power supply.