Specification of cement tile

Cement tile is a common material in buildings, which is waterproof, fireproof and durable, and is widely used for covering and decorating building components such as roofs and walls. The specifications of cement tile include size, thickness, weight, etc. Let's take a closer look.

measure

The dimensions of cement tile generally refer to the dimensions of length, width and height. Common cement brick sizes are as follows:

1.420 * 330mm

2.400 * 250mm

3.500 * 250mm

4.600 * 300mm

Cement bricks of these sizes can be cut as required to meet the needs of different building components.

thickness

The thickness of cement tile is usually about 20mm, because cement tile needs to have certain strength and durability, and at the same time, it needs to keep a light weight, which is convenient for construction and transportation.

weight

The weight of cement tile is also an important factor affecting its use. Generally speaking, the lighter the weight of cement tile, the lower the construction and transportation costs, but at the same time, its strength and stability should be guaranteed. The weight of ordinary cement brick is as follows:

1.2.5kg/piece

2. 3. 5 kg/piece

3. 4. 5 kg/piece

4. 5. 5 kg/piece

operation sequence/order

The use of cement tile generally requires the following operation steps:

1. Ready

Before cement brick construction, some preparatory work needs to be done, including cleaning up the construction site and confirming the construction drawings and material list. At the same time, necessary construction tools and safety measures need to be prepared.

2. Install cement bricks

When installing cement bricks, you need to cut the tiles and arrange them according to your needs. Then use special tile nails to fix the tiles on the building components, and pay attention to the number and position of tile nails to meet the specification requirements.

3. End and joint treatment

In the installation process of cement tile, it is necessary to treat the ends and joints of the tile to ensure its waterproofness and aesthetics. Usually, cement or special end and joint treatment materials can be used for treatment.

4. Complete the acceptance

After the cement tile is installed, it needs to be accepted to check its quality and safety. At the same time, it needs maintenance to prolong its service life.