Schematic diagram of Yuba switch disassembly

The disassembly method of Yuba switch is as follows:

First, turn off all four switches of Yuba, and don't work with electricity.

2. Dismantle the four big heating lamps and the middle lighting lamp of Yuba in turn.

Third, after the lamp is removed, you can see that there is a spring hook on the corner of the four headlights.

4. Remove the spring hooks on the four feet of Yuba plastic cover in turn.

5. Then remove the screws fixed on the ceiling frame.

Sixth, finally unplug the power cord of Yuba, and Yuba will be dismantled.

Extended data:

Precautions for using Yuba:

1, although the air-heated yuba is safer than the lamp-heated yuba, it uses electricity after all, so you should be more careful when using it. When we take a bath, we should be careful not to splash the bath bully with water. Yuba's waterproof light bulb has waterproof performance, but the metal fittings in the body can't do this, that is, the metal in the body is still conductive. If water is splashed, it will lead to danger such as short circuit of power supply.

2. Some owners always switch Yuba frequently for a more comfortable experience, which is actually wrong. Frequent switching of Yuba not only consumes a lot of electricity, but also affects the service life of heating bulbs. If you find that Yuba is abnormal during operation, you should stop using it immediately, and you can't disassemble and repair it yourself. You must ask the professional technicians in the after-sales service and maintenance department to carry out maintenance.

3. A dry and clean bathroom environment can prolong the service life of Yuba. So don't turn off the Yuba immediately after everyone takes a shower. It's best to wait until the moisture in the bathroom is removed before turning off the phone. In addition, everyone should clean the bathroom regularly, keep the bathroom well ventilated, and let the wind-heated Yuba serve us better.