Installation and folding tutorial for children's scooters

Children’s scooter installation video tutorial, assembly step diagram, how to install children’s scooter. Nowadays, more and more children like scooters, but scooters are fast, so there are certain safety issues. , if used improperly during sliding, it can easily cause harm to the child's body. In particular, some parents do not pay much attention to the installation of children's scooters. This approach is not good. Now I will share with you the video tutorials, assembly steps, and how to install children's scooters?

Children's scooter installation method and assembly steps diagram:

1. First open the purchased children's scooter, you can see some equipment, as well as installation and operating instructions. Parents can install it Before using a children's scooter, you should read the instruction manual carefully, and then install it according to the instruction manual.

2. This children's scooter is very simple to install. You can see a lock on the front of the body. Press both sides of the lock firmly in, so that the front body of the skateboard can be pressed in, and the gear can be adjusted. , you can adjust it appropriately according to your baby’s own needs.

3. Finally, press the handle of the scooter and hold down the small black dot on the front to take out or extend the handle, so that the scooter is ready for gliding.

Under normal circumstances, it is recommended that parents choose three-wheeled children's scooters. Such scooters have good stability and safety, and are suitable for young children who are new to scooters. Children's three-wheeled scooters only need to install and fasten the handlebars. Below is a video tutorial I found for installing a children's scooter. Interested friends can take a look.

Disassembly diagram of children's scooter armrests, how to dismantle the scooter poles

We often see some children gliding on scooters in the park, but the scooters are not operated properly for children. There are many examples of injuries, so parents should not blindly buy scooters for their children. Even if they do, they should wait until their children are older and buy scooters with guaranteed quality. In addition, many parents are not very clear about the disassembly and assembly of children's scooters. So what is the disassembly diagram of the handrails of children's scooters? How to remove the pole of a scooter?

When parents buy a children's scooter, they will have an instruction manual, which also includes installation and disassembly instructions. You can read the scooter's instruction manual carefully when disassembling the scooter's armrests, no matter what parents buy for their children. Which type of scooter it is, just follow the instructions for disassembly and installation. For example, the lower part of the handle of a children's scooter will have a pipe joint that matches the pipe seat. The rocker arm is hinged in the pipe joint. There is a button on the upper end of the rocker arm. There is a locking hook on the lower part of the rocker arm. Twist the screws above, so that the skateboard The car's armrests can be removed.

In fact, some scooter handles are very simple to remove. For example, the scooter in the picture below has a dot. You can take out the handle by pressing the dot, or you can install it. However, the scooters purchased by parents are different, and there may be some differences in installation and disassembly, so they should read the instructions carefully.

In addition, parents are reminded that before their children ride a scooter, they should jump the handle to a suitable height, so that the child can slide more smoothly and be less likely to fall. And parents had better teach their children how to ride a scooter, which can effectively reduce the occurrence of accidents.

How to install children's scooters and assemble elastic buckles

I believe you can often see children riding scooters in outdoor parks. Scooters can not only exercise children's physical coordination Ability, but also conducive to healthy growth. Nowadays, there are many ways to buy children's scooters, and buying them online is one of them. However, generally, scooters purchased online must be installed by yourself. So how do you install a children's scooter? And how to assemble the elastic buckle? Follow me below to learn more about this knowledge.

Children now basically use three-wheeled scooters. The installation and disassembly of this type of scooter is not complicated. During installation, you only need to install and fasten the handlebars tightly, and then you can glide. Parents are advised to read the instructions before installing a children's scooter to understand the detailed steps of installing the scooter.

There are other types of children’s scooters, such as frog scooters, traditional scooters, etc. Different types of scooters have age restrictions and there are certain differences in installation. Parents should Purchase selectively according to the specific situation of the child. However, it is not recommended to buy a children’s scooter that is too cheap, otherwise it will be difficult to guarantee the quality, and there will also be great safety risks during the sliding process.

Many parents do not understand the assembly of elastic buckles on children's scooters. In fact, elastic buckles are very easy to assemble. Generally, the elastic buckle has a wrench to adjust the size. Parents can place the elastic buckle in the position required in the instruction manual, then connect the scooter's pole through the elastic buckle to the body, and then turn the elastic buckle. Use the wrench to tighten the rod and the elastic buckle is assembled.