How to make all kinds of pillows?

1, choose a piece of cloth with your favorite color, then process it into a bag shape with no holes at both ends, then put the core of the candy pillow inside and tidy it up, so you can see a very full shape from the appearance.

2. Prepare two pairs of beautiful ribbons and tie the ends of the candy pillow.

3. You can directly tie the ribbon at both ends of the candy pillow, but tie the ribbon at both ends of the candy pillow. Once the ribbon is pulled, both ends will be tied. After the ribbon is tied, tie the ends of the candy pillow tightly.

4. If you still have spare capacity, you can hold a candy pillow and lock the edge with a ribbon.

Second, the pillow pattern lotus leaf pillow

1. Sew the short ends of the flounces and face them to form a ring. Fold the cloth strip in half longitudinally, with the reverse sides facing each other; Fold it into four sections, and make a cut mark of 1 cm on each section of folding line.

2. Prepare the pleated burrs and fix a thread with zigzag stitches. For a square pillow, the cut on the lotus leaf is aligned with the cloth angle of the front piece of the pillow, so that the front face is aligned with the raw edge; For rectangular pillows, align the cut with the midpoint of the edge. And nail it down.

3. Tighten the pleats until the lotus leaves fit on each side of the front piece of the pillow. Evenly distribute the pleats, and pleat more on the corners of the cloth, so that the flounces on the finished pillow will be smooth and put the flounces in place.

4. The sewing machine sews the flounces in front of the pillow with big stitches, just inside the pleating line.

5. Nail the back piece of the pillow to the front piece, with the front faces facing each other, so that the lotus leaf is placed between the front piece and the back piece. Seam 1.3cm seam, leaving an opening of 20.5cm for turning.

6. Turn the front of the pillow out, put it in the pillow core or the knife-edge pillow core, and secretly sew the opening.