Old house renovation door frame installation method

Old house renovation door frame installation method:

1.Preparation tools

Installation of the door frame need to use a number of tools, including rulers, hammers, screwdrivers, drills, ink lines, dowels and so on.

2. Measure the size of the door opening

First, you need to measure the width and height of the door opening to make sure that the size of the door frame matches the opening. If the doorway does not meet the standard size, the door frame will need to be cut.

3. Install the door frame

Apply glue around the door opening and place the door frame on the opening. Align and adjust the door frame so that it is plumb and level. Use an electric drill to secure the door frame in the doorway.

4. Install the door leaf

The door leaf should be installed before the door frame to ensure that it slides easily into the frame. Insert the door leaf into the door frame and test the switch action for proper operation. Keep the door leaf vertical and balanced when installing it.

5. Secure the door frame

Use a combination of dowels and screws to secure the door frame. Secure each corner of the door frame to the wall and make sure each corner fits tightly.

6. Install door locks

Use geometric formulas and tick marks to measure and mark the proper locations to install the door locks. Use an electric drill to punch holes in the door for the latch to be installed on the door. Install the latch on the door frame, making sure that the latch and the locking holes are aligned.

7. Test the operation of the door

The last thing you need to do is to make sure that the door opens and closes properly. When opening and closing the door, it should remain smooth and free from shaking and noise.

In short, installing a door frame is a tedious process that requires patience and skill. If you are not sure of your ability, it is best to get a professional builder to install the door frame. This will ensure the safety and stability of the installation.