How to make a simple instrument box guitar ... it is better to have details.

It's easy to make a guitar that can make sound.

But it is difficult to make a standard guitar. The difficulty is that 1, accessories and wood are hard to buy. 2 the production process is beyond the reach of ordinary people!

Guitar to put it bluntly:

A long handle is glued to a barrel, and a string is tied to the handle, and the other end of the string is fixed in the center of the barrel.

Anyone with good hands-on ability can do it!

The most basic thing is to get the reel (that is, the button on the piano head) ready first.

In this way, the strength of the taut strings can be controlled.

The rest of the material can be found in life! Plywood, harder wood,

The first thing is to make a wooden barrel. Maybe you have to ask why the barrel should be shaped like a plump woman. I can tell you responsibly that the shape has nothing to do with the timbre, just: 1, the leg is stable, 2, beautiful. You can also make a round one. Before it's too late, basically you will want to make a normal shape.

The first step is to bend the side plate and cut the plywood into strips with the width of 10 cm (the thicker the barrel, the better the timbre; If it's too thick, it's not portable, and it's not convenient to play), bake it on air, bend it while baking, and do it a few times more, and you'll understand the temper of the board. You can spray some water to soften the wood. After bending two women-shaped side plates.

The second step is to connect the side panels and put the left and right halves of the woman together. Figuratively speaking, there is a piece of wood in the neck position and a piece of wood in the ass position. If you don't know how to find a guitar and flashlight, you will.

Step three, the side panels are inlaid with wood edges. Professionally, a chainsaw with hundreds of blades is used to saw the wooden strips into tank tracks and then stick them on the inside of the side plates. If we do it ourselves, we won't have much leisure time. We can directly heat and bend it into the shape of a side plate, stick it together with the side plate and fix it with a clip. The role of wrapping is to fix the shape of the side plate and connect the side plate with the panel and back plate.

Step 4, buckle the finished female bucket on the plywood, draw the shape, and then start cutting the panel and back panel. It doesn't matter if there is a round hole in the panel, refer to the guitar photos on the internet, and the position is slightly larger.

Step 5: Glue the back panel and feel the inside of the guitar by yourself. How can plywood bear the tension of six strings? So if you think about it, you will know that it takes a few tendons to be strong! For professional guitars, the ribs on the panel are acoustic, and we can't help it. Look at the pendulum, how strong the characters "Wang" and "Tian" are and how they came from, or find a guitar anatomical map on the Internet, print it out and follow the gourd painting gourd ladle.

Step 6: Glue the back plate to the side plate of the bucket, so that the bucket is finished.

The seventh part, find a piece of hard wood, solid wood floor, and make a piano neck. Fine on the top and thick on the bottom, this requires strict size, which is directly related to playing. The specific size, in fact, each brand is different. Just go to the music store and measure it.

Step 8, find a dark thin board as a fingerboard, the harder the better. The distance between threads should be measured. In fact, as long as you measure one accurately, because the distance between threads is proportional, such as 1 /2 =2 /3, the rest can be calculated. Finally, you can calculate the position of the bridge, so that you can make a guitar with nonstandard size, but the sound is definitely standard. Because the ratio is the same!

Step 9: Slot the needle wire with a saw blade, find the steel wire, make the needle wire and insert it into the fingerboard. One is a plane and the other is a cylinder. After the glue is embedded, the strength is acceptable.

Step 10, the fingerboard necks are bonded together. Regular guitarists will sell a steel core under the fingerboard, and we can't buy it, so don't count on it, just straighten it once. In fact, the two kinds of wood are bonded together, and the deformation resistance is still quite strong. Deformation can be predicted in advance, deliberately made into a bulging neck. Overkill.

Eleventh, the neck is connected to the barrel, and the kiss should be done with the neck.

Step 12: Winding the winder.

Step 13, locate the position of the bridge of the nose and fix the bridge of the nose according to the distance of the neck position. You can see at a glance that it is a square piece of wood, which is used to tighten the strings. There is a groove on it, and there is a square ivory strip in the groove. On the one hand, it supports the strings strongly, on the other hand, it can adjust the height of the strings. The bridge can be fixed with screws because the tension of the strings is too great.

Step 14, draw, buy a can of self-drawing, draw, hahaha, finished.