Traditional Culture Encyclopedia - Traditional festivals - How to adjust the floating

How to adjust the floating

Explain how to adjust the fishing float.

How to adjust the drift of fishing

|

Label: fishing

Experienced fishermen know that when fishing, the float is like the fisherman's eyes, so the importance of the float is extraordinary. Fishermen need to master the skills of ups and downs if they want to have a good harvest.

1. drift:

Refers to setting the balance point of the intersection point between the float and the water surface by adding or subtracting the weight of the shot put in the line group. Due to different fishing concepts and different understandings of floating, there are many ways to adjust floating, each with its own reasons. It's hard to say which method is right and which method is wrong. However, when fishing in different waters or catching different species, if the drift adjustment method you are used to is ineffective, it is the best policy to deal with it in time.

2. Drifting with bait:

When floating, the bait hangs a double hook to control the waterline length, so that the bait ball does not touch the bottom and the double bait is suspended. The weight of the double bait suspended in the water has been balanced by the buoyancy of the float, and the weight is zero, fluttering in the water. When the fish swims near the bait, the sucked and spit water can drive the bait to move, resulting in the displacement of the float. People who drift in this way, ideologically speaking, are pursuing an absolute sensitivity and always hope to catch fish in the first action of eating bait. However, excessive sensitivity has also brought some side effects-the false signals of floating have increased obviously, and dancing and floating will make you dizzy and at a loss.

Although floating with bait will increase the number of fake moves, it is not without countermeasures. The trouble of fake action can be solved by the simple way of adjusting the mind and fishing. For example, you can catch two eyes, three eyes, even five eyes and six eyes by hanging two baits and adjusting one eye. As long as the drift has a signal, it is no problem to fish boldly. For fishermen, if they are not afraid of floating, they are afraid of floating.

3. Drifting without bait:

Baitless floating can also be said to be empty hook floating. Bleaching is the same as using bait except that the bait is not hung on the double hook. The guiding ideology of this drift adjustment is to ignore the weight of bait and let at least one bait ball fall to the bottom of the water when fishing. This drifting method is widely used by competitive fishing enthusiasts. Its advantages are lethargy, both offensive and defensive, and it has a certain effect on slippery fish. Of course, this method of drift adjustment is invincible only when fishing crucian carp in competitive fish ponds, but fishing other fish species in natural waters is a mixed success and failure, and there is no absolute advantage. Whether with bait or without bait, it must be carried out on the premise that the double hook does not touch the bottom. Once the hook touches the bottom, it is not allowed to drift. Novices must pay special attention to this.

4. Single hook drift adjustment:

Cut off the bottom hook before bleaching, leaving only one hook. People who like to adjust drift in this way emphasize that one hook must be undercover and the other hook must touch the bottom when fishing, so there is no need to think so much between fishing. This method is simple and practical, and is adopted by most middle-aged and elderly people.

For example, if you are used to fishing with three eyes, adjust it to a single hook and half water with three eyes, ignore the weight of a hook, and put a pair of the same auxiliary lines after adjustment. When fishing, let the float out of the water for three eyes. At this time, the bottom hook must be undercover, and the hook also touches the bottom.

5. Real fishing state adjustment:

The whole drifting process must be completed in the actual fishing state.

(1) Drift at the fishing point after determining the fishing point;

(2) using the determined line group to adjust the drift;

(3) When fishing, the big line enters the water, and when drifting, the big line also enters the water. When fishing, fish with a pole. If the rope doesn't enter the water, don't enter the water when drifting.

(4) Be sure to adjust the float after the float and the line group are fully drained (after soaking for half an hour), otherwise there may be one or two differences for the high-sensitivity float.

6. Semi-aqueous bleaching:

It means that the double hook must be suspended when floating, not that the waterline is half the depth of the water. For example, if you drift at a depth of two meters, you don't want to drift with a one-meter long waterline. If you really drift like this, it may not be allowed. Because when you adjust the float, the weight of the one-meter waterline is not included in the counterweight. For a highly sensitive float, there may be a multi-eye difference.

7. Rough tune:

Refers to the rough adjustment before the formal bleaching, and then the floating line is soaked while throwing the pole to make a nest, and then the bleaching is adjusted half an hour later; Because both the float and the fishing line have micropores, they will absorb some water after entering the water. This method of coarse adjustment is to make dry bleaching and trunk line fully absorb water before fine adjustment to ensure accurate adjustment.

8. Fine-tuning:

Fine tuning is usually after drift. In actual fishing, it is found that the floating language is not very accurate, only a very small amount of lead skin increases or decreases or the floating moves slightly up and down. For example, when you find that the float has a signal, but you can't catch fish by lifting the pole, or it often happens that the pole runs underwater, you just need to move the float up by one third, and you don't need to adjust the lead weight, which can play a fine-tuning role. You can also add a little lead skin to the lead pendant without floating, so that the fisheye can move up a little; If you start with five catches and three catches, and add small lead, it will become five catches and two and a half eyes. These methods are fine-tuning.

Teach you how to judge whether the floating sound is correct or not.

First, whether floating into the water is smooth.

After the correct float comes out, its posture of entering the water is very beautiful: it stands up slowly on the surface of the water, then sinks slowly, and finally it is a slight and inconspicuous meal. If the movement is smooth, first of all, it means that gone with the wind is basically successful.

Second, when the fish eat the bait, the floating reaction is a powerful meal (at this time, it is necessary to throw the rod and stab the fish). Don't mention the pole, slowly lift your eyes behind you, you can still fish with a pole. This shows that your floating * * * is very correct.

Third, the posture of floating in the water is like a monkey, unstable up and down, exaggerated movements, and there is no fish in the swing, which shows that your floating is too clever. Try again with a little lead? Fourth, the floating movement seems to be slow and heavy, either you can't see the mouth of the next meal or you can't see the mouth of the next meal without fish. Most of them can look up and mention fish, and they can also mention fish. The hook hangs on the lower lip of the fish. This situation shows that too much lead is added to your float. Try to remove a little lead? Five, a water area is a kind of buoyancy, and the water quality of each water area is different, and the buoyancy will be different. Remember to readjust the drift when fishing in another water area.

How to adjust the floating is the easiest.

After selecting the buoy with a good line, put a little more lead on the lead cover so that the weight of the lead cover is greater than the buoyancy of the buoy. Throw the line group into the water and the buoy will be submerged. At this time, paddle the buoy upward until the buoy comes out of the water for 2 eyes, and then the lead falls to the bottom. The distance from the eyes of the buoy to the plumb drop is the actual water depth of your fishing point.

2. Smooth the length of the long line of the buoy to the hook direction, and increase it by 5 on the basis of 10 cm. Trim the lead bit by bit. After trimming once, throw the fishing group into the water once. Gradually, you will see that with the reduction of lead skin, your buoy will slowly surface. When your buoy is exposed for two purposes, your hook will be 5 to 10 cm from the bottom, which is the length reserved in front of you. 3. Continue to trim the lead until the buoy shows your intention to adjust, and the hook does not touch the bottom, and your half-water adjustment is completed. Then check it in turn, press the waterline with a pole and let the buoy sink into the water. Then you can see whether the buoy stays on the adjustment you set after it floats from the water. If not, continue to adjust.

4. After the above steps are completed, stroke the buoy 5- 10 cm towards the pole tip, hook it with a double hook, and gradually adjust your fishing eyes after throwing it into the water. When the double bait shows the fishing eye you want, the whole calibration process is over, and then you can start fishing. PS: The 5- 10 cm I mentioned above is controlled by yourself, as long as you ensure that the hook is not at the end when adjusting the bid.

Several adjustment methods of buoys

1. Floating fishing: The total gravity of the fishing group is not as big as the buoyancy of the buoy after the bait is hung with double hooks, so after the bait is hung, the bait with double hooks can still be easily put into each ideal water layer.

Generally, it is suitable for semi-water non-benthic fish fishing, such as Japanese white crucian carp, brook fish, silver carp and bighead carp. Pond fishing of benthic fish is also used now: for example, pulling and floating, a standard depth and so on.

... this method is the most sensitive in theory as long as it can't be hooked to the end. When the fish approaches, the buoy will respond. If the bottom has been found, so that a bait touches the bottom and a bait hangs on the bottom, benthic fish can still be caught.

But this method is difficult to find the bottom; Second, even if the bottom is found, because of the error of the hook point and the inequality of the bottom, there is no guarantee that the bait will be hit to the bottom every time, which is still not conducive to the bait of benthic fish. However, in some special cases, such as when the fish (thermogenic or aerobic) leave the bottom, floating fishing is in hand.

Second, the double hook bait is adjusted to several meshes: the double hook hangs bait at the bottom, and the lead skin is adjusted from the standard tail to a certain mesh (generally not more than 3 meshes). This adjustment method is actually in the range of plain floating fishing, and bottom fishing is the most sensitive area. For example, how to find the bottom of two hooks and three baits? Anti-adjustment method can be used: first, paddle the buoy to catch 4 meshes (larger than the adjusted mesh) to ensure that the bait has touched the bottom; Then, tap the buoy gently and reset the fishing eye to 3 eyes. At this time, the bait touches the bottom, hangs on the bottom, moves, and catches the fish season at the moment of swallowing the bait, which is the most sensitive buoy adjustment method.

As long as it is not a tricky fish, it is especially suitable for fishing crucian carp. However, before the fish get close to the bait, swimming will change the current, which may lead to false fishing season and misjudgment.

Similarly, because the bottom of the pond is uneven or the size of bait is uneven, the fishing order will change up and down in three sequences, which is normal. However, this method is not applicable when the sliding of wind, waves and water has a great influence.

Third, double bait leveling water: the three methods of double bait leveling water, empty hook leveling water and hook-free leveling water can be named as the zero buoyancy adjustment method with so-called residual buoyancy =0 at the tail. Double bait leveling water belongs to "shallow swallowing", which reflects the zero buoyancy of fast-food fish news; Empty hook level water belongs to zero buoyancy for catching "deep swallowing" and "looking up" fish news; Flat water without hook belongs to the zero buoyancy of catching "turning around after swallowing bait" to delay fish news.

The double bait leveling method is the same as the double bait leveling method, except that the leveling method is set to leveling. As for how to find the bottom? In principle, as long as you see the fish eye, the bait is determined to the end.

If the fishing net is set to 2 meshes, the lower hook line will bend or go undercover for about 2 meshes. And so on.

After the double bait leveled the water, the upper bait hung on the bottom and the lower bait touched the bottom. This is a highly sensitive adjustment method, which can be used for other basic fish feelings except gentle mouth and cunning fish.

Brother Yun personally thinks that the problem of "returning to zero" (the most sensitive point of buoy) that everyone often said in previous years may be the point of "double bait leveling"! Based on the general bait for crucian carp fishing (the weight of double bait is between 3 and 7 meshes), which is similar to the legendary "zero return" interval, (zero floating point = zero return) is the most reasonable calculation. ..... Fourth, single bait leveling water: hook bait with upper hook or lower hook, and adjust the hanging bottom to level water.

After this single bait fishing group is balanced, as long as one more bait is hung, the whole fishing group will definitely sink until the lower bait touches the bottom, and the upper bait lightly rubs the bottom (ignoring the support force of the lower bait sub-line); So there is no problem of finding the bottom. This method has more users than double bait and is applicable to a wider variety of fish.

... according to the weight of a single bait (thin tail label)-"Tiao 4 and Fish 2" are located near this point! ... the reason why I chose "adjusting four and catching two" as an introductory method should be related to the law of large numbers. The advantage of this upward adjustment method is that it increases the variable of "bait weight", which is actually more accurate than the downward adjustment method of "empty hook adjustment 4 hanging bait fishing 2" ... It is a slightly blunt fishing method, which makes the lower bait drag the bottom and the upper bait touch the bottom, which is suitable for normal use.

Five, empty hook level water: this adjustment method is already a downward adjustment method without hanging bait. After the empty hook is adjusted to the horizontal level, continue to pull the buoy seat upward without baiting, and pull the tail just out of the water, so that the lower hook touches the bottom and the hook hangs on the bottom.

If double bait (regardless of size) is hung, the upper bait touches the bottom and the lower bait goes undercover (the lying distance is related to the distance between the double hooks). If you add a fishing order, such as fishing order 2, the bait sub-line will also start to bend due to the extra length of the order 2.

This adjustment point is the starting point of double bait bottom fishing, and it is also an ineffective or dull intermediate point. After this, it will become a dull world. When the wind and waves are heavy and the current is disturbed, this method can stabilize the fishing group. Because the state of double hook bait is relatively stable, it is more suitable for long-lived fish that slip in winter.

6. Leveling water without hook: Remove the double hook of the auxiliary line, leave the fishing group above the lead seat, and adjust the buoy to level water from the bottom. After the adjustment is completed, hang up the double hook and bait, and pull up the buoy seat until the fishing eyes are no more than 2, which is the hook-free leveling method.

At this time, the double hook is undercover and the auxiliary line is bent. ..... need to add two-wire support.

After testing, the same water depth, the same fishing point, no matter how long the auxiliary line is added, the fishing eye of the buoy exposed to the water in the suspended state is the same. If the secondary line is too long and the bending range is large, it will inevitably prolong the response time of fish news, otherwise it should be unnecessary.

This kind of zero buoyancy control mode except the handle line seems very dull to people, but in fact the fish news is quite lively; When a small fish is hooked, the buoy will also vibrate up and down, but the amplitude and speed are not large; The big fish will have a simple pause, and it takes experience to judge the lifting pole, otherwise it is easy to hang the fish. ..... This method, in principle, is suitable for fish that eat badly in summer. Fishing crucian carp in winter can prolong life, which is not recommended.

In principle, the smoother the fish, the closer it is to "flat water without hook"; When the fish mouth is slightly awkward, it is better to adjust the "empty hook to level the water". How to deal with it, be single-minded, there is no absolute.

Another point that needs special attention is that no matter how good the buoy is, it also has different degrees of water seepage problems, so it needs to be calibrated frequently. Seven. Heavy (taking lead) As long as the lead is readjusted to the "hook-free level" a little more, the lead base will definitely hit the bottom, and now it has begun to enter the heavy range ... It is unnecessary and impossible to adjust the standard ... If it is necessary to use it, it is recommended to adopt live lead base or lead introduction method, which will be helpful for subtle fish information and special circumstances.

Otherwise, you can only catch fish when you bite in summer. Before adjusting the standard, the individual should weigh the draft of the double bait and sink the net, so as to be aware of it, and then according to the target fish, weather, water situation, fish situation and other factors, from top to bottom.

How to simply adjust the float?

Common calibration methods for fishing in Taiwan Province;

65438+

2. Smooth the length of the long line of the buoy to the hook direction, and increase it by 5 on the basis of 10 cm. Trim the lead bit by bit. After trimming once, throw the fishing group into the water once. Gradually, you will see that with the reduction of lead skin, your buoy will slowly surface. When your buoy is exposed for two purposes, your hook will be 5 to 10 cm from the bottom, which is the length reserved in front of you.

3. Continue to trim the lead until the buoy shows your intention to adjust, and the hook does not touch the bottom, and your half-water adjustment is completed. Then check it in turn, press the waterline with a pole and let the buoy sink into the water. Then you can see whether the buoy stays on the adjustment you set after it floats from the water. If not, continue to adjust.

4. After the above steps are completed, stroke the buoy 5- 10 cm towards the pole tip, hook it with a double hook, and gradually adjust your fishing eyes after throwing it into the water. When the double bait shows the fishing eye you want, the whole calibration process is over, and then you can start fishing.

PS: The 5- 10 cm I mentioned above is controlled by yourself, as long as you ensure that the hook is not at the end when adjusting the bid.

How to adjust the floating?

How to adjust the floating?

2009-09-24 09:45

First, the wild fishing chooses the drift, and the bottom fishing is best to choose the slender hard tail drift. (Floating fishing can be selected according to the specific situation) Because this slender marker can generate less buoyancy, it is sensitive to the weight of bait. It is easy to detect that the bait is underwater. Secondly, the water depth difference of one inch can be compatible, and it will not affect the state of the fishing group too much. Second, drifting and drifting wild fishing, I suggest that you use single bait drifting as the first choice, that is, hang a single bait in half water to make the water flat. Catch two eyes. The advantage of this drift adjustment method is that whether you throw the hook at the same fishing point or not, you can ensure that the bottom hook touches the bottom and the bait touches the bottom. (Please refer to related articles for specific drift adjustment methods. Thirdly, after trying to find a good fishing spot repeatedly, don't rush to fish. It is best to hang a slightly heavier bait and consciously throw more shots at the fishing point of your choice. On the one hand, you can make nests to lure fish, on the other hand, you can find out the basic situation of the bottom of the fishing point by hitting the rod. Find the most suitable position of the hook. If you are careful, even if the bottom of the water is uneven, you can always find a relatively flat place, even if it is small. A small piece of sand scattered from a rock. A relatively flat place on a slope. After finding such a place, it is necessary to determine several reference objects according to the surrounding environment for positioning. For example, find a reference in front to determine the direction of throwing rod. Then, the offshore position of the fishing point is determined according to the number of lines received after throwing the rod or the angle of lifting the rod. In this way, it is easy to fix the point. Fourth, fine-tuning Once the fishing point is selected, the water depth will be relatively stable. At this time, we will carefully adjust the drift according to the situation of the fish. It is much more convenient to adjust dullness or spirit. But no matter how to adjust the drift, it is necessary to know the state of the bait in the water. Five, according to the mouth to reverse drift in addition to judging the hook analysis according to the eye adjustment and fishing eyes, we can also analyze the state of the hook bait in the water according to the fish's mouth reaction, which is roughly summarized as follows: 1, multi-meal, multi-hook, 2, multi-feeding, multi-sinking hook. 3. There are many slips and floats, and the buoyancy is small. 4, jitter, buoyancy. 5, multiple double tails, split line bending. 6. Always rake the fish and hook it at the bottom. 7. How empty the pole is, how light it will fall. 8, drift often oblique, cut with the fish.

Illustration of how to adjust lead and float

1. Float adjustment method (adjust the weight of lead skin required for fish float) First, row the float to a distance of 10 ~ 30cm, and throw it into the water to see how many meshes are exposed in the water at this time, and whether it is the mesh you want to adjust. If so, there is no need to add or subtract lead. If not, add or subtract lead appropriately.

For example, I took a No.2 crucian carp with jujube stones. I want to float the fish and catch more fish. The goal is to adjust 7 eyes to catch 3 eyes (lead skin hanging, one hook touching the bottom, the other hook lying on the bottom). Then when I stroke the float 30 cm away from the lead pendant and throw it into the water, it floats in the water to reveal 4 eyes, which is 3 eyes short of the 7 eyes I want to adjust, indicating that the lead is heavy (the lead and the hook are lying at the bottom). If 1 1 mesh is exposed in the water, it is 4 meshes different from the 7 meshes I want to adjust, which means that the lead is light (all the lead hooks are suspended), and some lead skins need to be adjusted to 7 meshes (lead skins are suspended, one hook is suspended and the other hook touches the bottom). 2. Find the bottom (find the distance from the fish to the bottom) As in the above example, my drift is 7 orders, and I want to catch 3 orders.

Draw the adjusted drift (7 mesh) upward for a short distance (depending on the visual depth), rub the bait and throw it into the fishing spot. If the drift sinks directly (indicate the water depth), pull the drift away from the lead skin for a period of time, rub the bait again and throw it into the fishing spot. If it floats out of 1 mesh (indicating that the bottom has been found, it can also be fished at this time. Then pull away from the lead skin for a period of time (it looks almost 2 eyes, and it needs to be tried several times under normal circumstances), and catch it until it floats in the water and shows 3 eyes (the lead skin is suspended, one hook touches the bottom, and the other hook is undercover). Note: 1. There is no need to install a hook when adjusting the drift, because in general, the weight of the hook and bait at the bottom of the water is borne by the bottom.

2. When a wavy fish floats out of the water (caused by undercurrent), the number of fish eyes should generally be kept a little more, because undercurrent will make the fish tilt with the lead line. For example, if you need to fish 3 eyes in running water, you should pull the float away from the lead 1-2 eyes in the original still water (depending on the rapidity of the water) until it floats in the water and exposes 3 eyes. 3. The state of the hook in the water is directly related to the amount of lead eaten by the fish, and it is also related to the fact that individuals like to fish hard liquor and slow fishing. The above is just the way to find the bottom. To understand the state of lead skin and double hook, we must gradually understand it from practice.

Hope to adopt ~ ~ ~.

How to adjust the float when fishing

Bleaching flow chart

Roll the lead skin on the lead skin seat, and the lead skin must be tightly wrapped. How about fishing? Push hard and the lead skin will loosen.

Put the fish float on the float seat and put it into the water. As shown in the figure, the weight of lead makes the float sink into the water, because the buoyancy of the float is less than the weight of lead. After the float sinks into the water, move the float upward to increase the waterline until it comes out of the water. In this way, the depth of water can be measured, and the length of water depth is the distance from the fishing line under the eyes to the lead-based end. So that the water depth can be measured.

After measuring the water depth, you can adjust the drift, adjust the distance between the drift and the lead base to half of the water depth, and then put it into the water, at which time the drift sinks into the water again.

At this time, you can cut off the lead skin on the lead skin seat bit by bit with scissors, and be careful not to cut too much at a time. Every time the lead skin is cut off, the weight of the lead skin will be reduced a little. As the weight of the lead skin is gradually reduced, when the weight of the lead skin is less than the weight of the float, the float will slowly surface.

Let the float float on the water for 4 eyes. If the float rises above 4 meshes, add some lead leather on the lead leather seat to reduce the float to only 4 meshes.

Then hang the food on the hook and put it into the water, and then it will float and sink into the water. This is because the weight of lead skin and food is greater than the buoyancy after hanging food. What you have to do at this time is to lift the float up until it is 3 eyes above the water, and put it down until it is 3 eyes above the water. This is what Taiwan fishing calls "adjusting 4 fishing and 3 fishing", that is, adjusting the empty hook to 4 meshes after floating out of the water and then to 3 meshes after feeding. You can adjust 4 fishing 2, 6 fishing 3, or 4 fishing 4 and so on in combination with the above methods. . Among them, key 4 and fishing 2 are the most sensitive, and key 4 and fishing 4 are the most blunt. This is what Taiwan Province fishermen call fishing spirit and fishing dullness. Generally, it's a little dull to drift in places where small fish are noisy. Drift can be reduced when there are many big fish and little fish stirring.