Nail dead skin with what to remove clipping dead skin and repair shape which first

When we do nail art, nail technicians will first give our nails to remove the dead skin, nail softening nails to remove the dead skin is a very necessary step, nail dead skin with dead skin scissors can be removed.

Nail dead skin with what to remove

1, the non-woven fabric flat folded, and then the thumb set into it, then put away the excess, so that the tip of the thumb against the non-woven fabric. Spray the right amount of alcohol on the non-woven fabric

2, the palm of the left hand open, with the thumb and index finger pinch the guest's fingers, the remaining three fingers to support the other hand.

3, pinch the guest's fingers, in the direction of the dead skin cutter's blade, flat cut. Be careful not to cut intermittently, but try to cut in a line.

4, cut to half of the back edge of the fingertip, stop. Switch to the other side of the cut, also the same cut to the center.

5, after cutting, and then dispose of some bits and pieces of small dead skin flakes. You can use the alcohol on the non-woven cloth to gently wipe the nail surface.

Which is the first step to cut the dead skin and repair the shape

Repair the shape first.

1. Sterilize your own and customer's hands with disinfectant water to remove bacteria and fungus from the surface of nails and hands. b. Sterilize the nail tools with a spray bottle. c. Sterilize your nail tools with a spray bottle. d. Sterilize the nail tools with a spray bottle.

2. If the customer's nails were originally coated with nail polish, use nail polish to clean them off first.

3, according to the customer's hand shape, use manicure strips to repair the beautiful shape.

4, put the softener evenly coated in the nail around, with dead skin push, push up the dead skin and cuticles.

5, with 4 in 1 polishing block, narrow black, the first nail tablets polished flat, because our nails, grow out will have a striped road, sanding and polishing will be polished nails flat, smooth, help us better painted beautiful nails, sanding pay attention to the strength and evenness.

6, with a cotton swab dipped a little wax to the nail, with a wax strip evenly open can. Wax can increase the brightness and hardness of the nails to make them look fuller.

7, with the nutrient oil, coated in the place where the cuticles and dead skin have just gone, and then massage until absorbed, to promote the healthy growth of nails, to prevent the birth of barbs.

8, calcium oil, also known as calcium base oil beggar's oil, it can play a protective nail, prevent nails yellow, no shine.

9, brush the number of oil is also pay attention to, generally 3 brush, repeated brush, it is easy to dissolve with the color underneath, the color is not uniform. (First brush the middle)

10, bright oil is to play the role of blockade nail polish, to prevent the color off. Why painted bright oil, the color also fall off, and still fall off from the fingertips, there are 2 reasons, the first is the MM brush color is not uniform, the fingertip part of the brush thick, of course, it is easy to fall off, there is also a glossy oil is not wrapped, wrapped means that the first with the bright oil, the fingertip part of the brush horizontally, like wrapped with a side edge, so that it will not be easy to fall off from the fingertips.

What color nails to do in autumn and winter look good

1, gentle temperament color

Speaking of gentle temperament nail color, a lot of young ladies in the heart of the first choice is estimated to be the milky tea color, milky tea color is indeed a very gentle color, the most important thing is that the milky tea color due to the color saturation is low, will not appear to be hand black. Of course, milky tea color can also be used as a base color, appropriate with some shimmer, can also be added to a bright autumn and winter. However, the temperament of the gentle and lovely color is not only milky tea color a oh, and it with a little brown tone of caramel color. Caramel is a very interesting color, feel also with a little red tone. This color also does not appear to hand black, as suitable for commuting use, of course, milk curry color can also be used alternately with it, coated with it, you are the most gentle young lady oh.

2, the queen of the air color

Speaking of the queen of the fall and winter color, the most impressive image is the car color, red tone with some purple, but the two colors are just right, so that the queen temperament is revealed. And Chelsea color can be said to be the least naughty color, white skin coated with it can be more white, yellow skin coated with it can become white skin, commuting is not very suitable for it, but in the time of bouncing with it, you are the queen. In addition to Chelsea color, dark green is also a very feminine, very queenly aura of color. Dark green manicure with a black coat, obviously feel like walking with the wind. And, although the dark green manicure is not so high-profile compared to the Chelsea color, it is more like a queen behind the scenes, low-key white-collar must-have color.

3, sweet macaron color

Autumn and winter there is a very girly color. Although the fall and winter can not use bright girls pink, but girls do not need to be discouraged, other lovely macaron color system is still applicable, such as taro purple and so on. Don't worry about the macaron color will first show hand black, as long as you do your homework beforehand, choose the right macaron color for yourself!

Diamond nail how to clean

1, choose the right tool

Let's try the first step with the clip off the metal ring method of decomposition of jewelry, the tool used is discarded dead skin scissors. (Dead skin clippers have a relatively small head, the operation can be accurately positioned, even after the abandonment is also a very good tool for cutting jewelry.) After a few tries, I realized that the adhesive wrapping the jewelry was so thick that the dead skin scissors slipped on it! After giving up on the dead skin scissors, we used a pair of scissors designed to cut jewelry, which has a long handle and pointed tip, making it more powerful than the dead skin scissors when applying the same amount of force. It took only a single stroke to separate the glue that connects the nail surface to the jewelry.

2, from the corner of the jewelry to start cutting

No matter which tool you use, you have to start from the "corner" first. Scissors mouth force uniformly aimed at a weak corner, will be more efficient than aiming at a "side" operation; this can also be done to a certain extent to prevent the scissors slippery situation.

3, grasp the strength

Of course, must also grasp the force, can not pursue a cut jewelry, so it is likely to be too much force, hurt the nail. Also pay attention to the guest's feelings, whether to shrink, or show the appearance of pain, as a reference to determine whether they have touched the nail.

4, step by step disintegration of jewelry

After cutting open the glue, try to use scissors to cut the jewelry, disintegration, and then a small degree of pulling the metal jewelry to hinge on the surface of the metal to make it separate from the nail, nail technicians at this time must be used with fingers to help customers fix the nail bed, to avoid loosening of the nail bed or cause pain to customers, to protect the customer's nails. After hinging up a section of metal jewelry, it is necessary to cut it in time, and then the next section of the treatment, repeat the steps of disintegration, until the removal of the complete. It is best not to pull down all the metal jewelry at once, one is not easy to grasp the strength, may peel off the metal jewelry at the same time hurt the surface layer of nails, the second is to facilitate the control of the knife edge, more secure.

5, sanding glue connection

Nail polish is difficult to remove through the jewelry glue on the nail surface, so after removing the jewelry on the surface of the nail, the first thing you need to do is to remove the adhesive glue clean. Use a coarse sand bar to throw away the glue residue on the nail surface, which is a safe and efficient method.

6, sanding to dust to see the color glue color

In the sanding process, how to judge has been thrown to the color glue layer, not to over-sanding hurt nails? When you see the dust polished out of the dust and the appearance of color glue color dust Hou shows that it has been sanded to the color glue layer, you can also stop.

7, remove the dust after normal uninstallation

After seeing the color gel layer exposed, the nail technician can sweep away the dust, wrapped uninstallation package or tinfoil for normal uninstallation of nails.