10cm gypsum line cut how many centimeters10cm gypsum line corner cutting tips

Gypsum line is often used in ceiling decoration, but it is inevitable to cut corners. Generally, gypsum lines are cut by hand with a small saw, so how many centimeters does 10 cm gypsum line cut? What are the corner cutting skills of 10 cm gypsum line? When we decorate the plastering line, we must know the specific cutting angle. Here we bring an introduction of how many centimeters gypsum is cut by wire.

10 cm gypsum line cut how many centimeters?

10 cm gypsum wire cutting angle can be divided into two situations:

1, tangent angle of horizontal line: the section should not be vertical, but inclined. As for whether the outer mouth is inclined or the inner mouth is inclined, you can search it. According to the different angles of yin and yang, the way of oblique cutting will be different.

2. Stick a 45-degree cutting angle. If it is a flat line, the gypsum line is as wide. For example, cut the plaster line of 10 cm into 10 cm and cut it into a diagonal of 45 degrees.

If you stick a 45-degree cutting angle, here is a formula, how much to cut = gypsum line width *0.7, such as 10 cm line, usually cut 7 cm, of course, there are 6 cm according to the situation.

10 cm gypsum line corner cutting tip

1. First, the cross section of plastering line is regarded as a triangle, the length of the inclined plane is C, the right-angle edge near the ceiling is A, and the right-angle edge near the wall is B. ..

2. Cut the plaster line in a plane to form an acute angle TG θ = C/A. When cutting, remember that the angle is below, and you only need to cut one side when touching the angle.

3. Also, because the slope of plastering line is arc-shaped, and it is cut into a straight line, gypsum can generally be mixed to repair the joint.

The above is an introduction to the corner cutting skills of 10 cm gypsum line. Generally speaking, the gypsum line of 10 cm is cut off by about 6-7 cm, and the specific formula is how much to cut off = gypsum line width *0.7. If you don't know the corner cutting of gypsum line, you should find a professional master to operate it well, otherwise it will not only lead to too many corner cutting, but also affect the appearance. I want to know more about the cutting angle of gypsum line.