Embroidery course of cross-stitch insole

The embroidery course of cross-stitch insole is as follows:

1, threading the needle. Embroidery thread is average. Pull out the required length, fold it in half and thread it. You can get four strands after folding in half. Be careful not to knot the thread.

2. Choose the position where embroidery starts from the front, and thread the needle to the back to remember the position.

3. After selecting the holes to be embroidered, put the embroidered cloth under a layer of insole cloth every four or five holes to reach the position of the holes to be embroidered, then draw out the thread, and slowly hide the end of the thread to start embroidery.

4. After pulling, the extra part can be cut off, or it can be pulled in and hidden, and the irregular place should be cut off.

5. After the thread is buried, pass through a pinhole from the back of the insole to the front of the insole, and then pass through one side "/"or ","according to the shape of "X" to the back of the insole.

6. Then, just put the needle through the hole in the back. At the same time, press the end of the line with your finger. After about three stitches, it can be loosened. Because the pattern here is relatively regular, it is a small piece of white, which can be embroidered with cross stitch. You can embroider one and a half, embroider one row or several rows, and then come back to embroider the other side.

7. After starting the needle, the upper part of the needle is embroidered with a needle inclined to the left. Next, you need to choose the corresponding hole to embroider another needle that is half right.

8. In this way, cross-stitch is completed.

Embroidered in this way, we can in turn see that the back will be a beautiful vertical line, remember not to pull the line for laziness.