Ceramic vase shape design considerations

Ceramic craft vase is made of traditional porcelain vase as the embryo, through the new process of fiberglass resin Uv coating, so that the formation and traditional porcelain the same light, color, pattern and decorative effect, its production technology and process:

1. Ceramic craft vase resin priming: with color glue or add color paste resin

A, color glue is pre-promoted, in the use of the time you need to add only 1.5%-2.5% hardener can be.

B. When the resin is used to add color paste to the base, the amount of color paste added to the resin is 2%-4%, and you need to add 1.5%-2.5% curing agent and 1.5-2.5% accelerator when you use it.

2. Ceramic vase paste straw painting

3. Ceramic vase transparent layer production

A, in the production of ceramic vase transparent layer, you need to use transparent resin, and add curing agent and accelerator, the thickness of the straw painting is completely buried and more than 1.5-2mm as well, to be cured, sand flat, and then begin to use the 400#,600#, 800#, 1000#, 1200#, 1500#, 2000#, 2500# water sand after polishing can be made into mirror crystal effect.

B, in the production of ceramic vase transparent layer, you need to use transparent resin, and add curing agent and accelerator, the thickness of the straw painting is completely buried and more than 1.5-2mm as well, to be cured, with 600-800 # sand flat, and then with the varnish resin varnish after curing after varnish machine can be obtained after the mirror effect. Shorten the working time and improve efficiency.

Ceramic vases are fragile items, maintenance of ceramics, mainly to prevent external destructive factors. The so-called external destructive factors, natural factors, human factors and accidental factors. Natural factors mainly refers to the temperature, light, dust, etc., ceramic vases should not be placed in the place of high temperature and strong light, especially thin-fiber ceramic vases. Ceramic vase on the accumulation of dust, to use a soft cloth to wipe, like treating the baby's tender skin as carefully. Place properly to prevent tipping. Appreciation of the hand to take off the ring and other hard objects, to avoid scratching the glaze or knocking the edge of the chip. When you take the object, one hand to support the bottom, the other hand to hold the body, never just one hand to grasp the mouth edge of the object to pick up.

Pottery is different from porcelain, pottery is fired from clay. Porcelain is made by powdering ceramic stones, mixing them into a paste and pouring them into molds. Pottery and porcelain fired at the same temperature, porcelain is harder.

Appliquéd ceramic vases made after the surface spray paint, and then appliquéd, and finally spray varnish to protect the flowers, so that it is not easy to fall. Products used to make ceramics with dolomite, shiny ceramics are fired white embryo, then glazed, spray paint, the whole process needs to be baked twice. Ceramic vase surface without light is spray matte paint, some are spray semi-gloss paint.

High-temperature ceramic vases are fired with pottery, the temperature reaches more than 800 degrees, there is a certain degree of hardness, sound crisp. The pattern on top of the high temperature ceramic vase is hand crocheted before glazing and the color is filled in. High-temperature ceramic vase and medium and low temperature ceramic vase is the most obvious difference is the water absorption rate, high-temperature ceramic vase water absorption rate is less than 0.2%, the product is easy to clean will not adsorb odors, will not occur in the glaze cracking and local water leakage phenomenon. In the low-temperature ceramic vase water absorption rate is much higher than this standard. As for the shape of the design as long as beautiful and practical can be hollow asymmetric twisted as long as you want to get creative is a good design 。。。。。