Is it carpentry to lay solid wood floors?

Precautions for floor paving: It is recommended to pave the keel first and then pave it in a few days. Uneven keel may require discarding or cutting short head;

After the keel is laid, it should be placed for a week to check whether there is looseness or inclination of the keel. Before laying the floor, put away camphor wood blocks and insect repellent, and then spread the damp-proof film all over. The standard board 9 10 should not be nailed less (a board should be nailed with four eyes and four nails, and workers often only nail three eyes in order to save time, so it is recommended to send someone to watch it);

When the floor comes into play, it should be classified first (mainly divided into straight stripes and large patterns), and the defective ones should be laid under the bed, under the cabinet and other places where you can't see clearly.

Extended data:

Pay attention to your health

Temperature control: Don't put items with higher temperature directly on the floor. The surface paint film may be burnt due to thermal transformation. Even if there is no obvious scald phenomenon, the service life of cork floor will be greatly reduced after long-term use.

Avoid damage: Although the wooden floor has a certain bearing capacity, floor mats should be added under the furniture with a small bearing area at the bottom to reduce the damage to the floor and prevent the cork floor from being deformed due to excessive local pressure.

Daily use: furniture can only be placed on the floor after 24 hours of installation, and the movement of people on it should be minimized within 24 hours. If you want to move the furniture, it is recommended to lift it lightly to avoid scratching the floor.