Installation skills of sliding door

Sliding door is one of the common categories in modern home, and some skills should be paid attention to when installing it. This article will introduce some installation skills of sliding doors for everyone.

Sliding door height

The size of the track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. When the height of the door is lower than 1.95m, people feel depressed. Therefore, when making sliding doors, the height should be at least 195+ 12=207 cm.

gold lacquer

The gold size of a normal door is about 80 cm× 200 cm. Under this structure, the door is relatively stable and beautiful. Therefore, the width-height ratio of sliding doors is close to the size of gold.

Matters needing attention when using open suspension track box

Use the sliding door carefully from the ground to the top (open the hanging rail box). Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened, which means that it cannot be maintained and used.

Track installation skills

When installing the sliding door track, fix the upper track, use gravity cone (hanging wire hammer) to hang three points at both ends and midpoint of the upper track, draw a 3.3-point fixed surface on the ground, install the upper track, and then put a hanging hammer at the center point of the upper track to the ground. Vertical lines should be placed at both ends of the cross bar, and the lower cross bar should be fixed at these three points, so as to ensure that the upper and lower cross bars are completely parallel, and the push and pull of the sliding door will be in the best state.