What are the types of glazed tiles

1, slate tile: this is the main waterproofing components covered in the roof, the cross-section of a quarter-circle, the front is wider, the rear is narrower, the thickness of about 1.6 ~ 2.4cm. when used tilted on the back of the stucco, a piece of the order of a piece of the press laid, generally according to the pressure of the seven dew three (i.e., the top of the one tile pressed the following piece of the tiles 70% of the tiles, revealing the law of the discharge of 30%). The order of laying is generally according to press seven dew three (i.e. the top one tile presses the following one tile body 70%, reveals 30% of the regular emissions. In the eaves and ridge root parts, due to the slope of the roof is different, should be appropriate to put thin or encrypted. The first half of 30% of the exposed surface of the tile should be glazed.

2, tube tile: this is used to seal the two Long board tile tile Long intersection line of the roof waterproofing components. Cross-section is semicircular, there is a tongue at the end of the tongue like tenon called bear head, used to lap with another piece of tile above. Placed in the intersection of the two longboard tile, overlay buckle in the two longboard tile joints, to ensure that the rain does not seep down from the two longboard tile intersection. Tile back all glazed, back tongue and groove to avoid glaze.

3, drip: placed at the bottom end of the tile tile long (gable end), used to seal protection board tile long head, is to make the rain drip down a drainage components. Cross-section of a quarter-circle, the same as the board tile, one end is wider and one end is narrower. The wider end has a pendulous tongue of Ruyi shape, tongue and tile surface at an angle of more than 90 degrees, above the carving pattern.

4, ditch head: placed in the lowest part of each Long tube tile that is the gable head position, used to seal the tube tile Long head, and ensure that the rainwater flows away from the components. Section is semicircular, the back half of the same shape with the tube tile, the front half of the forefront of a disc-shaped blocking head, blocking the head of carved flowers.

5, justified ditch: placed in the ridge before and after the intersection of the two slopes of the tile Long, used to cover the front and back of the top of the slope of the barrel tile and tile waterproofing components, shaped like an outstretched cow's tongue, the thickness of 1.5 ~ 2.0cm, tile back all glazed.

Related:

The glazed tiles which are glazed with various color glazes and fired at a higher temperature are called glazed tiles. Glazed tiles are traditional Chinese building pieces, usually applied with colored lead glazes such as golden yellow, emerald green, turquoise blue, etc. They have been the pride of building materials because of their sturdy materials, bright colors and glossy glazes. According to the literature, the word glaze arises from the ancient Indian language, with the Buddhist culture and the east, its original representative color actually refers to the blue. In ancient China, there is a kind of glaze belonging to one of the seven treasures. In addition to blue, glaze also includes red, white, black, yellow, green, cyan blue and other colors.

Production process:

The production process of glazed tiles is not complicated, the production line equipment can be used in fully automatic production line equipment, or part of the combination of mechanical equipment and manual production, automatic production line equipment with high automation procedures, less labor required. Adopt part of the mechanical equipment and manual combination of production methods.

Molding mode:

1, extrusion molding

The ordinary tile of glazed tile is extruded into shape by extruder, extrusion machine is installed in the outlet of mud churning machine with a head of the same size as the blank, and when the blanks are extruded, it will be cut into blanks with steel wire and put on the bracket to be dried, repaired, dried and burnt.

2, hand-formed

Manual molding is the billet clay patted into a mud cake, embossed in the plaster mold with a pattern of the billet, a little dry after the billet affixed to the work surface will be trimmed and polished.

3, plastic pressure molding

Western glazed tiles are mainly molded by plastic pressure molding, which is extruded and cut into rough billet by vacuum mud machine, and then molded with molds of tile press for fine shape molding.