Traditional Culture Encyclopedia - Traditional festivals - How to use the gas stove?

How to use the gas stove?

The oven has two kinds of gas and electric heating, and its appearance is beautiful. According to your habits, we provide push-up and pull-down door handles. Gas stoves can be stacked in multiple layers, each layer is independently controlled, and customers can choose to order according to the actual production space. How to install and use: 1. Stack each layer of furnaces and connect them with connectors. 2. The right side of the gas stove should be more than 200MM away from the wall, and the back and left side should be more than 100MM away from the wall. An exhaust fan should be installed in the workshop to ensure air circulation. Everyone should connect the gas pipelines between each floor with liquefied bottled gas or pipeline natural gas. Never use coal as pipeline gas, otherwise it is easy to cause danger. After the connection, for the sake of safety, we can put soap bubbles on each interface to check whether the interface leaks. 5. Connect a 220-volt AC power source. Next, we can debug and use the gas stove. 6. First, turn on the power switch and the gas cylinder switch. 7. Everyone should set all the controller settings to O, and then turn on the power switch of the gas stove floor. 8. Turn the ignition temperature knob so that the pointer points to the set temperature. The heating indicator light ON the ON will light up and the gas stove will start heating. When the temperature in the furnace reaches the set temperature, it will automatically turn OFF, and the heat preservation indicator off will light up, which will automatically keep warm. When the temperature is 5℃ lower than the set temperature, the automatic ignition system will start to maintain the set furnace temperature. If you want to fire, it is the same operation. 9. If the fire of the gas stove is not lit after everyone sets the temperature of the fire, the gas valve will automatically close and give an alarm after 10 seconds. At this time, the two thermostats of the upper and lower fires should be set back to the O position and turned to the set temperature again. If the gas stove still doesn't work after repeated operation for more than three times, it needs troubleshooting and maintenance.