Hand rod to rockery rod tutorial

Hand rod to iso rod tutorial is as follows:

Materials: hand rod, fishing reel, guide ring, fishing reel card holder, fishing line, AB glue and so on.

1, the choice of hand rod

Hand rod to iso rod is recommended to use a hard rod, hardness 4H or more, tuning 28, 28 off 19 or 19 tuning, the length of 5.4 meters is better, but the specific use of how long according to the fishing ground, the fish situation and other factors, such as the main in the fishing rafts, streams, etc. can be used to fishing 2.7 meters or 3.6 meters of the hand rod, if the main in the sea reefs, lakes and reservoirs, and other places to fishing is recommended to use the 6.7 meters of the hand rod. For example, if you are mainly fishing in the seaside reefs, large lakes and reservoirs, you are recommended to use 6.3 meters or even 7.2 meters rods.

2, find all the accessories

Isocial rod and hand rod is the biggest difference is that isocial rod has a fishing reel and guide ring, with a hand rod to change the isocial rod is the main accessories have a fishing reel card holder, a number of guide ring (depending on the length of the rod, generally the first section with 2 or 3 guide ring, in addition to other pole slightly outside the section of a), isocial rod top ring, a rod cap, spinning wheel 1, a number of fishing line, AB glue, pe line, heat shrink tubing and so on.

2

3, guide ring

Hand rod handle section with AB glue fixed 2 to 3 guide ring, the top of the rod slightly with AB glue fixed iso rod top ring, the other rods section each section of the top position with AB glue fixed 1 guide ring. Be sure to purchase the guide rings according to the diameter of each section of the rod.

4. Fishing reel mount

There are three positions to be fixed for the fishing reel mount, use pe wire to tie the center and then both ends, every time you tie the wire, try to tighten it as hard as you can, then pull the wire joints to death and glue the threads together with AB glue, and then finally put on the heat-shrinkable tube to heat it up until it is completely tightened.

5, install fishing wheel

The fishing wheel is installed in the fishing wheel mount, hand rod to iso rod installation of fishing wheel and new iso rod is exactly the same way, only need to fishing wheel foot into the fishing wheel mount and tighten it, and then finally will be prepared to wrap the fishing line on the fishing wheel.

Difference between hand and iso rods

1, the difference in components

Again, there are differences in the components of iso rods and hand rods. In terms of broad categories, iso rods are casting rods, which come with a fishing reel, which is one of the important parts that make them up. Hand rods, on the other hand, are a type of rod without a fishing reel.

2, the use of occasion difference

Again, because of the characteristics of the two rods are different, so the use of occasion is also different, you need to understand the characteristics of the two in advance, and then according to the characteristics of the most appropriate use of the occasion to choose.

Generally speaking, iso rods can be used in both freshwater and saltwater waters, while hand rods are generally used in freshwater basins. In particular, when you take the iso fishing approach, it is generally in saltwater that the iso rods are used.

3, the price difference

In the purchase, the price of the two are also different. In comparison, the price of the iso rod is a bit more expensive.

4, hardness difference

First of all, in terms of hardness, the two have a relatively big difference. Iso rods are a kind of hard rod, while the hand rod is relatively soft, which can also be felt by touch.