Matters needing attention in floor heating laying

Laying floor heating will affect the story height, especially the liquid circulation system will account for 2/3 cm more than electric floor heating (graphene electric heating), which is mainly due to the diameter of water pipes. In order to ensure the long-term comfort and safety of floor heating, we need to pay attention to the following points.

High quality insulating board

Choosing high-quality insulation board is the key. The thickness of the insulation board should be at least 2-3 cm to prevent heat from being lost to the downstairs. For residents on the first floor, it is recommended to use 4-6 cm insulation board to deal with the problem of ground moisture regain.

reflective coating

Laying reflective film can reflect heat to the ground to the greatest extent, so its thickness can be ignored.

High quality water pipe

For the circulation system, it is very important to choose water pipes with good quality, which can avoid accidents such as tube explosion. Graphene electrothermal film requires manufacturers to have a good reputation, so as to ensure uniform heating and no attenuation.

Backfill cement layer

When backfilling the cement layer, it should be noted that its thickness is generally 3-4 cm. Some people do not use dry paving to backfill cement in order to reduce the height of the ground, but this may affect the heat storage and insulation effect of floor heating and the hardness of the ground, so I personally do not recommend it.

Special wooden floor or tile for floor heating.

When laying special wooden floor or ceramic tile for floor heating, its thickness is generally 1-2 cm. Based on the above factors, laying graphene electric floor heating takes up about 6-8 cm, while the circulating system will take up 8- 10 cm.