What are the common paints for furniture?

Commonly used furniture paints are as follows

Covering paint

Covering paint used to be used for homemade furniture. The paint completely covers the furniture material, and only the color of the paint can be seen. Commonly used are red, big green and so on. It has been eliminated.

raw lacquer

In the production of mahogany furniture, this kind of paint is often used and sprayed on the surface of furniture to reflect the color of the wood itself.

Polyurethane coating

Commonly used in the production of high-end furniture such as classical and post-modern. This paint has high permeability and can fully reflect the wood grain texture. Because the wooden conduit is completely filled, it achieves a smooth effect, which is often called sealing paint. This kind of paint has high cost, complicated operation, long process and difficult rework, but the paint is easy to clean and water can't enter the furniture through the paint film at all. Strong resistance to all kinds of corrosive substances.

PE coating

After construction, the paint can obtain a thick paint film with excellent fullness and luster, high transparency and good leveling. The original paint is light in color and easy to spray. The coating has ultra-high hardness and is often used in piano and other products. However, the adhesion is not good and it is easy to fall off.

Numerical control paint

NC paint is nitrocellulose paint, commonly known as nitrocellulose paint, which is especially suitable for antique effect, so it is often used in the production of American and British furniture. NC paint often has an open effect, and the catheter on the wood surface is exposed, pursuing a natural effect. NC paint has the characteristics of fast drying time, short working procedure and easy rework. Tianna water, alcohol, etc. It is easy to damage the surface of this paint. The surface scratches easily. Not resistant to high temperature, not allowed to burn.