If the film clothes are too long, can they be shortened by ironing them at high temperatures?

The servant thinks it is absolutely impossible to order it. Don’t you know the principle of thermal expansion and contraction? Moreover, high temperatures can easily damage fabrics, and the clothes may be burned. 1. Traditional irons use a high-temperature bottom plate to directly press and iron clothes. If you are not careful, the clothes will be burned. Nowadays, steam irons are mostly used. When used, they will spray water vapor through the bottom plate to the clothes, which is beneficial to ironing. It’s not easy to burn clothes.

2. In fact, if clothes are not flat to begin with, if they are subjected to "high temperature setting" all at once, clothes will wrinkle easily. If you iron it flat again, it will take more time.

If you iron the clothes at a low temperature first to "unwrinkle" the wrinkled clothes, and then iron them at a high temperature, it will be easier to iron the clothes flat. Ironing clothes is not only related to temperature, but also the use of irons. If you want to move forward and backward, just place the iron horizontally; if you want to move left and right, placing the iron straight will increase efficiency, thus indirectly saving time and energy. .

To iron clothes, different skills are required. For example, the order of ironing a shirt is: first iron from the inside of the collar from outside to inside, then iron the surface of the collar and the collar and shoulders on the back; iron the cuffs from the inside to outside, then iron the seams and pleats; and so on. After the back line is set and ironed, iron the back from the inside out, iron the buttons from the inside to the outside, and finally iron the front.

When ironing trousers, first turn the trousers over, open the pockets, and iron around the crotch first; then the pockets, trouser corners and seams; then iron the front, pressing the inside and outside of the right foot. , the inner side of the left foot, and the outer side of the left foot. Finally, put the corners of the two pants together and iron them.

When you first start ironing clothes, it is best to start with low temperature and then gradually use high temperature to deal with wrinkles.

3.

Preparation items before ironing:

(

The iron is divided into vertical steam iron and household iron

p>

)

1).

First place the ironing board on a flat ground

.

2 )

Check whether the ironing board has a heat shield attached

.

3)

Whether the temperature of the iron is suitable for the The material of the piece of clothing

(

Please refer to the washing water mark before ironing

)

4)

Know clearly which temperature the clothing is suitable for

Most clothing can be used with steam

,

only steam is not suitable

On the sticky parts

.

5)

Easily reflective

(

Mirror< /p>

)

clothing

,

Use an iron heat shield

,(

Or separate it with cloth

)

Making the fibers of clothing

less susceptible to damage

.

6)

The water storage capacity of the iron should be moderate

,

Not too full

,

< p>Otherwise, excess water will leak out and wet the clothes

,

causing stains on the clothes

.

7)

After the iron is put into water

,

Do not lay it flat

,

It should be tilted upwards slightly

,

otherwise water will leak

.

8)

The iron The temperature adjustment should be slowly adjusted from low temperature to high temperature

,

Adjust to the temperature suitable for the clothing

.

Remarks :

Neatly iron the areas where the iron cannot be used to iron the sticky pad

,

such as the front of a suit

,

Leaders, etc.

.

B

Common mistakes in ironing:

1)

The lapel line of clothing is not ironed correctly

(

Shirt

)

2)

The reverse side of the coat The placket line is not properly ironed

3)

Wrinkles appear on the top of the sleeves after hanging them

,

Mainly because they are not properly applied Suitable sleeve ironing tools

.

4)

The trouser bones are not in the center position

(

Ironing The bone position was not aligned

)

C

Things to note after ironing:

1)

Pour out all the water in the iron

,

Prevent long-term water storage in the iron from depositing stains in the iron

.

< p>2)

Remove the heat shield of the iron

.

D

How to repair burnt clothes

p>

I hope I can help you. Please ask a maid to help you iron your clothes correctly