Traditional Culture Encyclopedia - Traditional festivals - Closet diy, how to convert a closet into a pant rack

Closet diy, how to convert a closet into a pant rack

Making steps: want to install closet trouser rack in your own closet, first measure the size of the closet specifications, mainly affected by the depth and width of the interior of the closet. The general depth of the closet between 60 ~ 65cm, the width is not limited, as long as the stability of the shelf, the balance of the force of the trouser rack can be.

Step 1: Design, this modified trouser rack is composed of three main parts, trouser rack rod, rail and trouser rack border. According to the size of the closet I need to modify, remove the size of the rail, the final design of the length of 76cm, depth of 46cm trouser rack frame, trouser rack in the frame consists of 9 round wood trouser rack rod and a fixed bracket.

Step 2: material, pants frame material is very simple, two square material and a few round wood rods, wood can choose beech or camphor pine and so on. The processing of the square material need not say more, direct sawing processing can be. Round stick, one way to directly buy ready-made, the other is their first saw cut a good small square, and then slowly rounded with a planer.

Step 3: assembly, first two good square material with tape fixed together, and then marked with a pencil on the top of the installation position of the round stick. Round wooden rods spacing 7.5cm, labeled with a hand drill together for drilling. Drill through on the short square of wood and into the long square of wood at about 3/4 position. When ready, just assemble according to the design.

Finally installed.