What are the advantages and disadvantages of solid wood fingerboard furniture?

The development of real estate industry has increased the development of interior decoration, and furniture and building materials have also emerged. At present, in the domestic home building materials industry, you can see all kinds of products, such as furniture, which are made of many materials that people didn't pay much attention to before, such as finger joints. Fingerboard furniture has also been loved by many consumers. Compared with traditional solid wood furniture, it is different. As an ordinary consumer, you will want to pay attention to the differences of solid wood fingerboard furniture. You can read this article.

The difference between solid wood finger-jointed board furniture

1. Finger joint board: also known as integrated board, integrated board and finger joint board, that is, a board made of small pieces of solid wood after deep processing like "fingers". Because the interface between plates is serrated, similar to the cross joint of two fingers, it is called finger joint plate. Because the logs are cross-glued, the gluing structure itself has a certain adhesive force, and because there is no need to stick panels up and down, the amount of glue used is extremely small. Advantages: the environmental protection coefficient is relatively high, because the solid wood board has fewer seams and less glue. Easy processing, cutting, drilling, sawing and molding. Disadvantages: the solid wood finger joint plate is easy to deform and crack. The quality of good solid wood finger joint board is guaranteed, but the cost is higher.

2. Solid wood board: Multi-layer solid wood board is based on multi-layer plywood, and the surface is made of high-quality solid wood veneer or technical wood, which is made by cold pressing, hot pressing, sanding and curing. Because the multilayer solid wood board has the characteristics of difficult deformation and good indoor temperature and humidity adjustment performance, the surface solid wood veneer material has the texture and feel of natural solid wood and has stronger selectivity. Therefore, it is favored by consumers. Multi-layer solid wood board structure has good stability, difficult deformation and strong quality. Due to vertical and horizontal gluing and high temperature and pressure, the deformation defect of solid wood board is solved from the aspect of internal stress. Self-made high-quality environmental protection glue is used in the production process, so that the formaldehyde emission limit of the product meets the requirements of national standards and is green and environmentally friendly.

What are the advantages and disadvantages of finger joint board?

Advantages of finger joint board:

1, the finger joint plate is more environmentally friendly. What's more, the surface of finger joint plate is generally painted with clear water, and the environmental protection effect of paint sealing is better.

2. At present, the finger joint board is relatively cheap, generally at1/kloc-0-180, which is not much more expensive than the good joinery board.

Disadvantages of finger joint board:

1, the furniture made of finger joint plate is not real solid wood furniture in the traditional sense. Real solid wood furniture refers to flat wood furniture. The connection is made of a wedge or something, and it is made by buying a solid wood cube and putting it in a wrench. Finger joint plate is made of nail carpentry, which does not have the durability of solid wood furniture in the traditional sense.

2. Finger joint board is usually wood used in forest, cut into small pieces and made of finger joint board. These tree species are generally conifers and cypresses, which are not very good. The air drying process is generally not very long, and the water content is relatively high, which is easy to deform and crack.

The difference between solid wood finger furniture is as above. From the price point of view, finger-jointed furniture is more favorable than solid wood furniture, and consumers do not need to bear too much responsibility when purchasing finger-jointed furniture. But in terms of performance and experience, in fact, finger furniture is far less than solid wood furniture. What if you think the furniture at home will last for many years? I suggest that you should choose solid wood furniture. Of course, there are many kinds of furniture in the building materials market at present. Besides these two kinds, you can have other choices.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~