How to operate the engraving machine?

1. Open File-Input-Raster Image-Select Figure 2, Transform-Zoom-Resize 3. Select graphics-artistic surface-image texture-bitmap to grid-click on the picture to change the engraving depth 4. Select Figure-Virtual Sculpture Tool-Effect-Overall Polishing Point 65438+. Select Drawing-Tool Path-Path Guidance-Surface Fine Carving-Next-Tapered Flat Knife-ジブブブㄖㄖㄖㄖㄖㄖㄖㄖ𞫢𞫢𞫢𞫢12566666 Select Drawing-Tool Path-Output Tool Path-Change the file version to en3d 3. x- Feature Point-Lower left corner of the path.

2. Carve drawing 1, open file-input-dot matrix image-select Figure 2, open the capture point in the lower left corner-use polysemy line-spline curve-describe Figure 3, virtual carving tool-options-model properties-undo times-press Z key to undo step by step 4. Color-One-line color fill 6. Color-Seed color fills 7. Carving-stamping-interior color selection-stamping depth ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ ρ

3. Carve and bend the figure 1. Select Size-After the graph is generated into a grid. 2. Draw-rectangle-circle-draw-point-select a fixed point-micro distance-press Ctrl+ right key-and copy to the right vertex. 3. Drawing-Polysemy Line-Spline Curve-Connection. Symmetric Polysemy Line of Deformation Curve —— OK all options 5. Virtual sculpture tool-effect-overall polishing point twice 6. Model-Z transformation-high point moved to XOY 7. Tool Path-Path Guidance-Surface Carving-Next Step-Tapered Flat Knife-Bending Ω Mu. 9. Carve-only clear the Z axis of the highest fixed point-return to the origin and clear the X\Y axis.

Four. Carving 1. Open Wen Tai software-Create a new file-Click T to enter text-Click the arrow to select text-Right-click on the text to change the size of the text-Select the font of the text-Move the text to the lower left corner-Click 2D to change the engraving depth-Horizontal bottom milling in engraving mode-Tool selection in tool library-The secondary machining mode is edge hooking.

Verb (abbreviation of verb) engraving system control Turn on the control system-Pay attention to unloading the existing files-Read the downloaded files-Manually adjust the angle of engraving head to the origin w-Clear-XYZ axis-Slow down to the minimum-Look at the simulation-Start the spindle-Start engraving.

6. Cut a graphic part into another graphic 1, and generate a grid-virtual sculpture tool-drawing? The tool scans the corner of the tool tip. 2. Model-Intercept model-Click to delete the original model-Click to delete the lines of the scanned map. 3. Select Tools -0. On the position of the side of the aphid reef-artistic oil surface-splicing-selecting splicing oil surface-selecting base surface.

7. Make relief characters 1. Open the software-Text editing tool-Select a font-Click on the blank space in the box-Enter the font you want-Change the font size-Press Alignment 2. Virtual Sculpture Tool-Select Figure 3, Model-New Model-Confirm 4. Color-Single Line Color Fill-Select a color. Sculpture-Stamping-Stamping Depth

Note: Do not move the engraving template to avoid sudden power failure or unexpected suspension. First look at the current line segment number, and then click the advanced operating point to start inputting the line segment number of the specific location. Finally, click OK.