How to deal with the joints between wood flooring and floor tiles?

1, flat pressure strip

Flat pressure strip is used to cover two of the same horizontal height of the ground, can be used to make up for the gap between the floor and the floor, can also be used to make up for the gap between the floor and the floor tiles, that is, we usually say that the pressure strip is the most commonly used one.

2, 7 strips

This 7 strips it is to solve the floor to the end of the floor, the gap processing as well as the treatment of the mouth, 7 strips most commonly used in these places: there is no skirting place, the floor, the steps or the staircase at the opening.

3, high and low buckle

Previously referred to as the flat pressure strip is used for two pieces of horizontal ground between the articulation and processing, then the high and low buckle is used for tiles and flooring under the circumstances of the existence of the gap. This can be laid in the wood flooring and tiling before, it is necessary to calculate the two end of the project after the elevation, the specific operation of tile and flooring company master will communicate.

4, do not use pressure strip

Now there are many families also choose to lay solid wood flooring, if it is fixed with staples, that and the floor of the articulation of the place can be used without the pressure strip, and there are some pure solid wood flooring itself has been fixed in the top of the keel, by the impact of thermal expansion and contraction of a small amount, this time there is no need to install the pressure strip.