How to tie the sea pole wheel?

1, here's a method. Prepare a clothes hanger, a chopstick, two rubber bands, and if possible, find a plastic hose (external diameter is about 12 mm).

2. As shown in the figure, pass the plastic hose through the middle of the spool, and the length of the hose should be able to expose some from both ends of the spool. Then put chopsticks through the middle of the hose. You can only wear chopsticks without a hose, but the friction will be greater when winding the thread.

3. As shown in the figure below, bend the clothes hanger into a U-shape. The width of the U-shape should be slightly wider than the spool.

4. As shown in the figure below, combine the spool with the hanger and fix it with a rubber band. By adjusting the number and position of rubber band winding, the friction force when the spool rotates can be adjusted.

5. Hang up the hanger, shake the wheel handle and wind the thread. One problem with this method is that the plastic hose may fall off during winding. This problem can be solved by using a longer hose. Although a boat wheel is used in the picture, the winding process is the same as that of a spinning wheel.