CNC woodworking lathe in the operation of what needs attention

1, for the material: logs, sawn timber and finished product transportation, storage and operation should be mechanized, not mechanized production process, must take certain protective measures.

2, in the dangerous parts of woodworking machine tools such as exposed belt pan, turntable, rotary axis, etc., must be added safe and reliable closed-type shield, in the rotating parts of the shield should be a one-way rotation of the logo.

3, the process of processing wood, where conditions, all woodworking machinery should be installed automatic feeding device. Conditions do not allow the use of various types of safety fixtures, etc., the operator should not push the wood directly by hand. In the handling of logs and sawn timber, should also use special tools, such as hooks, hook pole, etc., the operator's hands should not be in direct contact with the wood.

4, woodworking machine tools should be positioned on the knife shaft stop mechanism, or knife shaft and electrical interlocking device for the installation and removal of tools. Avoid loading and unloading and replacement of tools, accidentally touch the power button and make the tool rotation, resulting in injury.

5, all kinds of woodworking machinery should be set up effective braking device, safety guards, after cutting off the power supply, the braking device should ensure that the knife shaft stops rotating within a specified time. For example, when the width of planer is greater than or equal to 300mm, the braking stop time should be no more than 10s; when the width of planer is less than 300mm, the braking stop time should be no more than 5s.

6, woodworking machine tools must be equipped with dust-absorbing device and chip removal channel. And to ensure that the workplace dust concentration does not exceed 10mg/m3. Dust-absorbing device should be able to ensure that after 8h of continuous work, the protective device is not due to the accumulation of wood dust and malfunction. The chip discharge channel should be kept free. There shall be no through-hole at the installation of dust-absorbing mouth, chip-exhausting channel and electrical components to prevent the electrical components from malfunctioning or catching fire.

7, woodworking machine tools use the power source for non-totally enclosed motor, the motor must be added on the fire, dustproof isolation cover.

8, sawdust and dust hopper, ventilation system in the pipeline and cyclone separator and so on should be the same as woodworking machine tools, anti-static grounding.

9, CNC woodworking machinery and equipment in the use of the process, it must be ensured that the use of any tool at any cutting speed will not produce a dangerous vibration, mounted on the tool axis and mandrel bearings rotating at high speeds, the axial clearance should not be too large, so as to avoid danger during operation.