How to remedy the waterproof failure of toilet?

1. If the waterproof material of the wall is not ready, it can be remedied later. I found that there was a problem of damp on the wall. First of all, stop using water, clean up the stagnant water in the bathroom and keep the whole room dry.

2. Remove all the original waterproof materials, putty layer and latex layer from the wall and do it again. If the original wall has been paved with tiles, it should be removed to meet the waterproof demand from a deeper level.

3. After the wall is cleaned, it should be leveled and then painted with waterproof material. Generally speaking, the coating thickness of waterproof materials should be above 1.5 mm, especially at the junction and corner of the wall and the ground, more waterproof materials should be coated.

3. At room temperature, the surface layer is dried for 4-5 hours, and then it is painted for the second time in a large area, and there will be no missing coating phenomenon. This time it should be drawn in the opposite direction to the last one. After complete curing, only scraping putty, brushing latex paint or sticking tiles can achieve the remedial effect.

Villa master provides you with local architectural policies, architectural drawings and villa design drawings;

Villa appearance rendering service, you can choose from thousands of red-hot drawings: www.bieshu.com? bdfc