Steps to install a computer system

The steps for installing a computer system are as follows:

1. Insert the USB flash drive, open and run the USB flash drive production tool, and switch to "USB flash drive -ISO mode".

2. First, click "Generate ISO image file" and "Select advanced PE". After the generation is completed, click "Make ISO startup disk". After selecting your USB drive, click "Write". After the writing is completed, the startup disk is ready. After the production is completed, copy the downloaded system image file to the USB flash drive.

3. When restarting the computer, always press and hold the one-button USB flash drive to start the shortcut key, which is generally (F 12, Del, F 1 1, F2, etc. ). The shortcut keys of different computer motherboards may be different. Many computers will have a short key prompt below when the logo screen appears.

4. After opening the startup selection interface, generally, the options with the word usb or the brand of U disk are all U disks. Use the direction key "↑↓" to select, and press enter to enter the PE selection interface.

5. After the above steps, enter the PE selection interface. Generally, you can select "02 WindowsPE/RamOS" and confirm.

6. After entering the PE desktop, the PE installation tool will automatically pop up. Here, check the system image to be installed first, and then select "Target Partition" in the lower left corner, which is generally the default. To avoid accidents, it is best to confirm whether the system disk (disk C) is selected, and then click "Install System".

7. It usually takes 4-5 minutes to complete the installation of the installed execution system.

8. After completion, restart the computer to complete the final installation until entering a brand-new system.