Manufacture method of self-made pipe rack

After determining the pipeline design you want, you should start sketching. The general shape of the whole pipeline and the direction of the flue should be drawn on wood. You must have a number in mind before the official start.

| 2- Open the cigarette box |

Muyou, who has a lathe, can go directly to the lathe by opening the cigarette bin. The enlarged drill bit I bought is very sharp as soon as I bought it. I modified it myself, and it was smooth. If there is no lathe, you can also use a bench drill. Fix it with a bench drill and then knock it down.

| 3- Making Flue |

Because the pipe I made is relatively long, the flue is turned out directly by the lathe, and the car is round. If there is no lathe, you can also use a bench drill. First, cut it into squares with a wire saw, and then grind it into circles with a bench drill. The outermost circle of the cigarette mouth must be cut flat, so that it can fit perfectly when connecting the cigarette holder.

| 4- Ventilation flue |

The most important step in making a pipe is to make a flue. Many wooden friends asked how to make a flue before. Let me elaborate on it here.

(1) If the design of the flue of this part of the pipeline is relatively long, it is necessary to purchase an extended drill bit to pass through the relatively long flue.

(2) When smoking, it should also be noted that some flues can be punched to the end, and some flues may be biased along the punch, making it impossible to enter the tobacco warehouse.

(3) Especially if the corner between the flue and the smoke bin is relatively large, it may be necessary to hit each other. It may hit halfway through the flue, and then halfway through the smoke bin. The two sides should fight against each other, and the two sides will fight each other and then join together, which will test your eyesight.

Generally, a 3mm drill bit is used to pass through the flue, and the long drill bit will be softer. You can drill a section with a short drill bit first, and then change the long drill bit.

(4) There is a special bent drill for pipes and flues, which is relatively rare in the market and will be used by professional barrel makers. If you can buy that kind of drill, you will save a lot of energy.

| 5- Making cigarette holders |

The flue is open, and the next step is to make a cigarette holder. If there are cigarette holders online, they range from tens to hundreds. I bought raw materials and made them myself.

This material is called Cumberland, which is a synthetic material. This material is bite-proof, and some people have the habit of smoking and fighting. Cumberland is unlikely to leave a tooth mark. I suggest Cumberland you call yourself.

First, Cumberland's words are food grade, non-toxic and relatively safe;

Second, Cumberland's modeling is plastic at high temperature, which is more suitable for his own modeling.

You should also punch holes in the middle of the cigarette holder. If you punch a hole in something longer, it will be easy to miss directly to the end. I suggest you hit both ends to ensure that the hole is in the middle. This is also a rule of thumb.

This is the flattened cigarette holder. No cigarette holder is drilled straight and needs post-treatment. The occlusal part is a long flat seam. This part is first drilled with a drill, then baked with a high-temperature gun and flattened with pliers.

| 6- The cigarette holder is connected with the pipe |

The thickness of the cigarette holder should be the same as that of the heather joint. The cigarette holder should have a small tenon and be properly inserted into the joint of the pipe. It is impossible to make it bigger or smaller. This should be done while trying, and the ideal state is perfect fit.

| 7- Cut off the superfluous parts |

The main process of making buckets here has been completed. Next, cut off the excess part of the bucket. If there is no machine, you can use hand tools, because some materials will be bigger. It will be more convenient to polish or shape if the excess parts are cut off.

| 8 files |

Next, file the shape. According to the shape you want to repair, you can use a file for hand tools. If the woodworking foundation is good, you can go directly to the angle grinder.

9- Polishing and Coloring

In this way, the size of the tube basically comes out. This is probably the effect of inserting the bucket and the cigarette holder together, and then it will be polished repeatedly, from 100 mesh, 200 mesh ... to about 5000 mesh, and then the heather will be colored and waxed, so that the cigarette holder will not be used. When polished to 5000 mesh, it will be very shiny.

I set a turquoise in the middle of this model. Generally speaking, this part will be clamped with silver, that is, a circle of silver thread, so that those straight or round cigarette holders can not be easily installed backwards.

I haven't finished polishing this. It's the first time. I'll give you the finished product another day.

| Other |

Professional cooperage will have its own exclusive steel seal, each barrel will have its own mark, and the production of barrels is more exquisite. How many grams of tobacco to pack and how big the hole in the barrel is are strictly controlled.