How to use fishing rod correctly?

When using the fishing rod, you should unplug it first, and then pull it out from the top one by one in sequence. When pulling, the strength should be the same, neither loose nor tight. The joint of the four sections of fishing rod should be slightly tightened, leaving no gap, so that the rod can be evenly stressed, the overall elasticity of the fishing rod can be fully exerted, and the rod can be prevented from breaking.

2. Combination of fishing rod and fishing line

Tie the fishing line in a double knot and put it on the "snake letter" at the tip of the fishing rod instead of using the old method of connector to avoid the entanglement of the fishing group when lifting the rod, which is time-consuming and laborious.

Step 3 use taboos

In the process of fishing, avoid soaking the rod section in water, otherwise it will easily cause the rod body to swell and it will be impossible to collect the rod. During the temporary rest, put the pole on the pole frame and don't throw it away at will to prevent others from breaking or stepping on it.

4. Fishing skills

After the big fish is hooked, the fishing rod must be filled with water and kept at 90 degrees from the water surface to increase the flexibility and toughness of the fishing rod. Wait until the fish is tired before copying the fish with a pole.

Step 5 dry the water

After fishing, the fishing rod should be opened in time, and the residual bait and dust stuck on the rod body should be washed with clear water to avoid pulling the rod body out of the scar. After drying, wipe the oil on the guard rod in time for the next use.

Extended data:

1, vibration. Hold the fishing rod, pull out all the rods and fix them, then shake the rod handle left and right and feel its vibration. Usually, the more inclined the fishing rod is, the closer the vibration center is to the grip; On the contrary, the more inclined the fishing rod is to the first tune, the farther the vibration center is from the grip (that is, the closer it is to the tip of the rod).

2. Different voices. Pay attention to the abnormal sound of the fishing rod when shaking it. Ring two or three times and it won't appear again. Maybe you didn't tighten it when you stretched it, which won't affect the quality. But if there is noise all the time, it is likely that the joint of the rod is not handled well. Don't buy this product.

3. Holidays. Nodes refer to whether the fishing rod is smooth when it is bent. The test method is to ask someone to help you hold the pole tip. You should stand up like a China fish (be careful not to hold it too hard, and the person holding the pole tip should not suddenly let go) and observe the bending radian of the whole pole. If a certain section (especially the thinner section) is bent badly or not, it is easy to have problems when fighting fish.

4. painting. Finally, carefully observe and touch the surface of the rod body while putting away the rod segments to see if there are defects such as bubbles, trachoma and uneven thickness. Check whether the reel seat and wire ring (if any) are installed firmly and correctly.

If there is no problem after inspection, then you can keep this fishing rod for yourself.