What is the design and practice of rural cookstove

When it comes to cooktops, I believe we are all familiar with it. Then the question comes, do you know what are the rural cooktop design and practice? What are the more common types of rural cooktops at present? Next, let me give you a brief introduction.

Rural cookstove design and practice

One, decide the exact location of the cookstove, open the exhaust pipe and build a chimney

1, decide the location of the cookstove, the shape of the shape is recommended according to their own needs.

2, decide the height of the stove, and mark accordingly, usually about 80 centimeters in height is appropriate.

3, set up a smoke hole in the wall, the opening should be sealed with mortar.

4, in the outdoor smoke holes, and the chimney must be more than the roof, otherwise the smoke will not be discharged.

Second, laying stove

Measuring while laying the stove, the stove usually just universal brick, while the stove door and ash vent should be synchronized.

Three, the stove

1, in order to make the stove life longer, the stove is usually based on refractory bricks.

2, the gap between the stove body and the stove chamber should be filled with gravel, both to avoid running smoke, but also to extend the life of the stove.

Four, the stove stove surface insulation fire-resistant construction

1, the stove chamber with thermal insulation material filling.

2, the hearth with brick sand, for the later refractory mud to prepare for the work.

3, stove surface with refractory mud construction, and to compact refractory mud.

4, with a pot in the stove on the mud compaction, and fixed pot specific installation position.

5, the refractory mud leveling.

Fifth, the flue, stop the fire ring construction

1, to ensure the strength of refractory mud on the basis of the stove chamber with brick sand construction.

2, in the round pit to do the flue, stop the fire ring.

Sixth, warm water mouth, pot mouth construction

1, warm water mouth and pot mouth must be done before the construction of heat preservation and refractory mud installed, as long as the fire, the water can become hot, available at any time.

2, pot and refractory mud parts need to be surrounded by cement to ensure the overall firmness.

3, with mortar to fix the stove surface flat, until the right height can be.

Seven, tile decoration

1, when the process has been completed, the last only need to tile.

2, the stove door to install flue baffle, to avoid smoke dispersal.

Eight, waiting to use

All processes are completed, need to be put about fifteen days, to ensure that the cement, bricks, etc. solidified before use.

Editor's summary: After reading the above introduction, I believe that you also have a further understanding of rural cooktop design and practice. For more related information, please continue to pay attention to our website, the follow-up will present you with more exciting content.