The whole process and size of rural wood stove making

Rural firewood stove making first to determine the construction location, then outside the house to build a chimney, and then brick the stove body, the pot mouth, and when finished, paste tiles will be good. The width of rural firewood stove is usually about 0.5m, and the height is between 0.8~1.00m.

One, rural firewood stove production process

1, to determine the location of the construction, open the smoke pipe, chimney. The ground line to determine the location, the wall line to determine the height. Excavate the smoke pipe in the wall. Chimney outside the house.

2. Ordinary bricks are used to build the stove body, including the stove door and ash vent, and the stove chamber. Use refractory bricks to build the hearth, and fill the area between the body and the hearth with crushed gravel.

3, stove stove surface insulation fireproof construction. Filled with thermal insulation materials, the hearth will be used in the crushed gravel and brick sand for protection, with a pot in the hearth above the compact refractory mud, refractory mud wiping flat flat shape.

4, warm water mouth pot mouth construction. Pot has been placed before the construction of insulation and refractory mud. Pot and refractory mud contact position with steel surrounded to ensure that the mouth of the pot firmly. Smoothing the stove surface with mortar is generally 78cm in height.

5, tiling for decoration, installation of stove door flue baffle. Finished need to wait fifteen days before use.

Two, rural firewood stove size

The height of the stove should be between 0.85m ~ 0.85m or 0.93m ~ 1.00m. The width of the cooktop should be between 0.46m~0.6m or 0.56m~0.63m.

Introduction of Rural Firewood Stove

Currently, most of the stoves used in rural areas are ordinary stoves, and ordinary firewood stoves consist of a hearth, a grate, a smoke outlet, a heat insulation layer, a chimney, an ash chamber, a stove door, and a pot, among other parts.