Playing method and making method of ice gyro

The playing method and making method of Bingzi Gyro are as follows:

A, ice yan gyro play:

1, preparation: choose a suitable ice lump, usually made of wood or plastic. Draw a circular area on the ice as the rotating area of the gyro.

2. Start: put Europe in the center of the rotation area, rotate around it with a whip, and then pull out the whip hard to make Europe start to rotate.

3. Observation: Observe the rotational speed and stability of ice impurities. If the ice miscellany rotates unsteadily, you can gently pat it with a whip to adjust its center of gravity.

4. Confrontation: Two players each spin their own ice cubes with a whip, and then throw the whip out so that the two ice cubes collide with each other. If one side falls or stops spinning, the other side is the winner.

Second, the production method:

1. Material: a straight wooden stick or plastic stick with a length of about 15cm, a round wooden board or plastic board with a diameter of about 10cm, some pigments and brushes.

2. Step: Cut the top of the wooden stick or plastic stick into a cone shape, so that it can be placed on the round wooden board or plastic board smoothly. B draw your favorite pattern or texture on a round wooden board or plastic board with pigments and brushes.

Fix the drawn round wooden board or plastic board on the wooden stick or plastic stick to ensure that they can rotate smoothly. Spin the whip around Europe, and then pull it out hard to make Europe start spinning.

Methods to improve the rotational stability and balance of ice hybrid gyro;

1. Choose the right material: choose a wooden stick or plastic stick with uniform texture and moderate weight as the rotating shaft of Europe.

2. Keep the center of gravity low: ensure that the center of gravity of ice impurities is as low as possible during the production process. You can add a counterweight to the wooden stick or plastic stick to make the center of gravity lower.

3. Add a balancing device: a small ball or a balancing ring can be installed at the top of the second ice tire to increase the balance of the ice tire.

4. Adjust the position of center of gravity: In the production process, the rotational stability and balance of ice mixing can be improved by adjusting the position of center of gravity.

5. Use the right whip: choose a whip with moderate degree and weight to ensure sufficient strength and stability.

6, practice skills: through repeated practice, master the correct starting and rotating skills, in order to improve the rotational stability and balance of children with ice.