What is the detailed method of making bamboo fishing rods?

1. The best bamboo for making fishing rods is Phyllostachys pubescens, Phyllostachys pubescens or Phyllostachys pubescens, with a diameter of 5 cm and a tail section of about 4 meters. The bamboo age of 3-5 years is better. First cut the selected bamboo, carefully remove the branches from the bamboo joints (don't hurt the bamboo green), and put it in the shade for a few days to let it lose water.

2. Bake each bamboo joint straight with a small stove, and spray the baked bamboo joint with cold water to finalize the design. Then hang it on the bamboo tip with appropriate weight and hang it upside down for a few days.

3. Take down the bamboo, cut out two sections with the length of 1 .6m and1.7m respectively, and then cut out the top section with the length of1m..

4. Open the last two sections (drill the bamboo joints from both ends with tools, then unfold them, and finally file the bamboo hollow completely), put the pole tip into the second section, and the second section into the tail section, with the pole length of about1.7m. ..

5. At the insertion position of the last pole section of each section, it is wrapped and reinforced with a strong wire about 5-6cm long. After the finished pole is dried in the shade, paint it several times. Go to the fishing gear shop to buy fishing lines, hooks and pendants; Fish float, you can find a feather stalk that fell when killing ducks and geese, cut it into a section of about 2cm, and make a float. Usually seven floats are used. Install the line assembly, so that the bamboo fishing rod becomes.