How to install the bathroom floor drain?

1, cleaning. Clean up the stains and dirt around the original leak first, and then wet the inner wall of the sewer pipe with clear water. Must be completely soaked to ensure installation.

2. installation. Put the floor drain into the hole, then press it in hard, and ensure that the floor drain is lower than the ground, so as to ensure the smooth inflow of water.

3. seal. After installation, seal the joint between the floor drain and the water pipe with sealant to ensure that the water will not leak from the gap to the downstairs bathroom when draining, thus causing disputes.

Reconstruction of bathroom floor drain? 1. Install the floor drain. There are two ways to add floor drain where there is no floor drain: one is to raise the ground and lay sewer pipes, which will affect the drainage. Second, it is troublesome to break through the floor and rearrange the sewer pipes, which requires downstairs construction.

2. Refit the floor drain with sewer pipe. The sewer of bathtub or washbasin is changed into a floor drain for shower. The main problem is that such sewer pipes are generally 40 pipes, and now there are small-caliber floor drains on the market.

3. Reinstall the fine floor drain. Install a thin floor drain (water seal 1 ~ 2 cm), the drainage is fine, but the height of the water seal is not enough, so the water will evaporate easily and the odor will come back, so you should always fill the floor drain with water or cover it with a wet cloth to prevent the water from evaporating. The solution is very simple, just change the built-in floor drain core, but try it, some can't be inserted.

4. Transform the old floor drain. Now many old-fashioned floor drains at home can't be sealed. If it is troublesome to replace the floor drain, there are many waterless sealed pipe diameters that can be directly inserted into the floor drain, which can play a sealing role. Watch the floor drain demonstration, open the floor drain and insert the floor drain core.

How to clear the S-bend blockage of the bathroom floor drain 1 and use stockings? Find a pair of unused stockings, the thinner the better. Cut a piece and put it on the floor drain to cover your hair outside and facilitate cleaning.

2. Use an excavator. You can buy a sewer dredge in the store and shake it in the sewer. You can also find the property department to clear it.

Step 3 use a hook. Bend a hook with a thicker wire, reach into the sewer and hook out the blocked thing in the sewer. This method can solve the fundamental problem.