The correct installation method of the light strip

The correct installation method of the light strip, as follows:

1, determine the length of the light strip needs to be installed, and then according to the installation of the length of the integer to intercept. Like our more common light strip, probably 1m a unit, so we have to ensure that the unit will not be destroyed when intercepting. This requires that the cut from the cutout, so as not to affect the circuit.

2, as we use in the home are not considering the issue of waterproofing, because the strip is installed in our ceiling recess, so the installation is very simple. For example, our more common LED light strip, most of them have self-adhesive tape on the back.

3, when we put the strip using self-adhesive tape to our ceiling groove, then you can connect the strip. If we are worried about the movement of the strip, then you can take some double-sided tape and then fixed. Finally, it can be fixed by hand, then we need to connect the light strip. Like the LED strip is generally three LEDs as a group of series or parallel way to form a circuit structure, so that we will directly disconnect these parts.

Precautions

1, the light strip installed at home, we must pay attention to some issues. Because the installation and fixing of the light strip is really very simple, but if the installation does not meet the requirements, it may lead to the whole light of the light strip is prone to problems. Especially lead to LED light strip heat, long time will be our ceiling position baked.

2, LED light strip connection distance, to be reasonable control items. For example, we are more common 3528 series of LED light belt and connecting distance, the longest can not exceed 20 m. If 5050 series of LED light belt, the longest connecting distance can not exceed 15 m. So when we install the light belt in the home, according to our choice of light belt to reasonably control its length.