Watch band removal installation video tutorial

Video tutorial

Preparation materials: watch, watch removal tool, watch band

1. Prepare the tool to remove the watch band, remove the tool as long as this long needle. Observe whether there is a groove mouth on the surface of the steel needle, if so it is very convenient to remove the watch band.

2. The back of the watch has a small groove mouth, you can use the steel needle to pry open the watch band can be dismantled, (left ... right) on both sides of the same method of dismantling.

3. Prepare the watch band you want to replace, and use the small needle you just removed to thread it into the small hole.

4. First install the right side of the position, and then press the left side of the finger can be installed, the installation of attention to the direction of up and down, two watch bands with the same installation method.

Precautions for strap replacement:

Before replacing the new strap, make sure that the size is matched; many watches of the same brand strap may not be the same size, so be sure to take a ruler to carefully measure the width of the mark; or directly original purchase of the same type of strap, a little more insurance. Replacement of the strap process must be careful, do a good job of protection of the watch, to avoid the raw ear or nail cuts to the watch, then it is not worth the loss.