Traditional Culture Encyclopedia - Traditional stories - Drying racks do not want to install the balcony can also be installed elsewhere

Drying racks do not want to install the balcony can also be installed elsewhere

Drying racks do not want to install the balcony can also be installed elsewhere

Drying racks do not want to install the balcony can also be installed elsewhere, a lot of people in the purchase of home furnishings will be purchased a rack, used to hang clothes and hats and so on, hanging racks can be very good to help us organize our clothes, to create a clean and tidy living environment, then the drying racks do not want to install the balcony can also be installed elsewhere The first thing you need to do is to get rid of it.

Drying racks do not want to install the balcony can be installed elsewhere 1

Drying racks in addition to the balcony can also be installed in the living room

Invisible up does not take up space

It is said that the spring rain is more rain, a period of time ago, have been under the rain of a number of rains, in fact, the rain is no matter, I am worried about the drying of clothes, my home, the first thing that I want is the drying of clothes. I'm worried about drying clothes, my balcony is open air, every time it rains can only pull the rope indoors, especially troublesome! The last time I went to my neighbor's house, I found his house in the living room to install the drying clothes, so I walked around, will not get in the way?

The living room is not convenient to install a drying rod is not beautiful, the neighbor said that the drying rack is mainly learned from Japan. After all, in Japan, some neighborhoods are not allowed to dry clothes on the balcony, so usually they are hidden directly in the ceiling, and only put down when needed. This kind of drying rod sounds almost the same as the ordinary lifting drying rod, but the advantages are still more.

Smarter

Ordinary lifting drying rods are adjusted by the handle, while the neighbor's drying rod is remote-controlled, more convenient, in addition, the top of this drying rod is also equipped with a dryer, compared to the drying of the clothes will be faster, so that the problem of difficult to dry clothes in the rain is solved.

More beautiful

The general elevation of the drying rod even if the adjustment of the ground is still exposed to the outside, so the degree of aesthetics is relatively poor, but the neighbor's home to dry the clothes is different, it can be hidden into the ceiling, it is usually really difficult to notice.

Wider application

Clothes drying rods are installed on the balcony of most homeowners' homes, including my home, while the neighbor's home of this kind of drying rods, because of the good hiding properties, so it can be installed in a lot of places in the home.

Corridor

Laundry room (bathroom), drying clothes is more convenient.

Regardless of which space is installed, it is best to be by the window, so that the lighting is better, but it is recommended to stay away from the kitchen, because there will be fumes when cooking, which will inevitably be stained on the clothes, and then the clothes will be washed in vain.

Although this drying rod installation is relatively simple, but must be planned in advance, the installation of the ceiling to allow the master to reserve a good hole, or later to come back to the hole is a hassle, because the drying rod is relatively light, so do not have to worry about load-bearing problems.

All in all, the neighbor's home this drying rack not only solves the problem of drying clothes, but also do not have to worry about will be unattractive, it is said that in Japan is very popular, of course, in the country is also applicable, especially for those who do not have a balcony of the small apartments, want to dry the clothes wherever you can.

Drying racks do not want to install the balcony can also be installed elsewhere 2

1, drying racks installed where appropriate

Drying racks are generally installed in the roof of the balcony, installed on the top does not take up space, but also does not affect the balcony of the placement of other items and the use of other features, so the balcony to install a drying rack is not a problem. Now. High-rise house drying clothes is a big problem, so the balcony drying rack is very important.

2, should the balcony be installed drying rack

The balcony should be installed drying rack.

The balcony still need to install drying racks, but we can change a little bit after all, no matter what kind of drying racks, home hanging laundry are not beautiful.

Especially in the living room connected to the balcony, the family has customers to visit, will inevitably see. If your requirements are not too high, and there is a balcony outside the room. You can weld a stainless steel drying rack directly above the balcony in the room, plus a drying rod clothes fork is perfect.

If you don't want to get so long a drying rod on the balcony, you can place a telescopic pole across the wall of the balcony. You don't have to make holes in the wall, and you can take it down whenever you want. Because it is placed horizontally, and do not worry about seeing the sun on the balcony of colorful clothes.

3, the balcony do not want to install drying racks

If some families do not want to install drying racks in the balcony, you can also use the washing machine with automatic drying function, after washing directly drying can be put up.

If there is a need to buy a folding drying rack at home, when you need to dry some large items can be taken out, after all, drying large items with less, usually do not use it, folded up in the home, so that there is no need to worry about drying racks take up space on the balcony, do not have to worry about drying racks mounted above the balcony impact on the aesthetic, so it is a good way.

Drying racks do not want to install the balcony can also be installed elsewhere 3

Drying racks installation location

In the need to install the balcony on the top of the balcony, with a steel ruler measure the diameter of the balcony on the top of the lighting, and then in the light on both sides of the 15cm-30cm between the installation of an installation mark (the length of the balcony according to the size of the decision)

This is the first time I've ever seen a light in the air.)

Then measure the interval between the mark and the edge of the balcony, according to this interval to determine the width of the top seat installation. And then the light as the center of the measurement of the balcony length, according to the length of the drying rod to determine the light on both sides of the flat 80cm-100cm, and then with the width of the measurement of the interval of four intersections

These four intersections is the top seat of the hanger installation position, the position is determined, with the drill drilling, drilling holes with the expansion screws to fix the first four top seat (such as the rod length more than the conventional size, the interval to adjust accordingly).

How to install the drying rack

1, open the outer packaging of the elevating drying rack, after checking no damage, count the spare parts of the drying rack, the general spare parts are: corners, fixed cover, rings, hand cranks, expansion screws, handles, steel wire rope, flute plugs, pulley rack.

2, first of all, the installation of hand cranks, hand cranks installed at either end of the corridor at either end, measure the location of the hand cranks need to be installed, generally one meter from the ground at a distance of two installations, the hand cranks placed in the location of the need to install, and then marked with a pen to mark the need to punch the hole fixed position, and then move away from the hand cranks, drill holes, the expansion of the installation of rubber plugs, and will be fixed to tighten the crank;

< p> Then the inside of the hand cranks, the expansion screws, the hand crank, and the hand cranks, the hand cranks, the hand cranks. p> Then shake out all the wire rope inside the hand crank, and when shaking out the wire rope, you need to haul the wire rope to avoid messing up the wire, until the handle can not be turned.

3, to determine the installation position of the pulley rack, pulley rack is installed in the ceiling of the four support points, close to the corner of this side of the double pulley rack, the end of the single pulley rack, generally to a single pulley rack, for example, a single pulley rack with the distance between the two sides of the wall should be greater than 27 centimeters

And the distance between the two single pulley rack should be greater than 45 centimeters, while a single pulley rack with a double pulley rack The general distance between the single pulley rack and double pulley rack is 2M, but finally the installation environment as the final condition. Determine the installation position after marking, and mark the holes, and then punch holes in the installation holes.

4. After punching the holes, assemble the expansion screws with the four pulley racks respectively.

5, after assembling the two double pulley racks and two single pulley racks were installed in the punched holes.

6, the corner with the expansion screws assembled together.

7, determine the location of the installation of the corner, the position of the corner must be perpendicular to the position of the hand crank, 90 degrees.

8, determine the installation position, then mark the holes and install the assembled corner unit.

9, wear steel wire step, the steel wire unpacking, respectively, hold the end of the two steel wires inside, they will be the first to wear into the corners.

10, then the ends of the wire rope through one of the double pulley frame, two wire rope parallel and do not entangle, the wire rope from the double pulley frame from the bottom of the wire rope out of the end of the rope pulled close to the position of the hand crank

The other end of the other end of all the pull through the corners of the other rope and the front of the same operation, and then the hand crank out of the end of the wire rope buckle, hung to the corners of the rope, another same operation. the end of the rope, the other one the same operation. In the installation of the fixed cover.

11, the installation of rings, just wear the wire 4 end cut flat, and then through the ring and tied.

12, install the drying rod, the four rings on both sides of the two drying rods respectively set good fixed.