Looking for tools to make a boat in a bottle is a tool needed for a sailing model. What chisel? Turn it by hand. You'd better have photos.

What kind of ship you choose to build will determine the shape of the bottle. A long three-masted sailboat needs a tall bottle, while a sailboat with a large front area uses a bottle with a large internal volume. Considering the display of the model, a flat bottle looks beautiful on the table. If it is round, it needs a bracket to prevent it from rolling on the table. Irregular bottles also need to be made into another bracket. Considering the difficulty of model making, a bottle with a short neck is easier to master in assembly than a bottle with a long neck (but if you want to use your model to participate in the competition, the model with a long neck is more popular with the judges).

Step 2 wash the bottle

Use adhesive to thoroughly remove all residues from clean label and bottles. Please check to make sure it is clean, because it is difficult to clean the model after it is put into the bottle. Here is a simple question. We should check whether the bottle is defective in time and plan it. Usually, bottles are empty molds, and a combination line will be produced at the joint of two pieces. In order not to affect the appreciation of your work, this line should be moved to the bottom or top of the flat bottle.

3. Make a plan to determine the model size in the bottle.

When choosing a sailboat and a scene, the size of the model should be determined according to the size of the bottle. Measure the actual size of each part of the ship model, and don't let your ship be too high or too long. This is a model sailboat in your living room. Before making it, you should also make sure that it is consistent with.

Make a list of tools and materials that may be used, and then change them when they need to be supplemented in actual work. It is a good work habit to check the list regularly, which can let you know the materials and tools you should add at any time. Make a "water surface" modeling mixture (blue and green); Acrylic paint for making waves (white); Wood and glue, small electric drill, sandpaper, compound saw, wire saw, some qualified iron wire, some wood, a bottle, bottle holder (if any), blade knife, tweezers, string and so on. Because of the variety of models, I won't list them here. Please arrange the tools and materials according to your own needs. Whether the living room matches.

Step 4 Prepare tools and materials

Make a list of tools and materials that may be used, and then change them when they need to be supplemented in actual work. It is a good work habit to check the list regularly, which can let you know the materials and tools you should add at any time. Make a "water surface" modeling mixture (blue and green); Acrylic paint for making waves (white); Wood and glue, small electric drill, sandpaper, compound saw, wire saw, some qualified iron wire, some wood, a bottle, bottle holder (if any), blade knife, tweezers, string and so on. Because of the variety of models, I won't list them here. Please arrange the tools and materials according to your own needs.

5, special tools (bottle operation)

Tweezers made by folding a metal strip in half (used when operating in a bottle). A layering tool made by folding a piece of metal (mainly used to adjust the operation of "water level" in a bottle). . L-shaped steel wire. (used when gluing water on bottles). A knife with a long pole (it can be made by connecting a surgical blade with a long steel wire to cut off excess rope in a bottle).