Fishing rod can not retrieve the most effective way to get stuck

The most effective way to retrieve the rod is as follows:

1, slightly stuck

When the rod is stuck in a less serious situation, we can take a downward approach to the use of inertia will be retrieved to the rod, or hold the stuck on both sides of the force of the left and right rotation of the rod, you can also be retrieved to the.

2, fishing rod seriously stuck

When the first method can not be solved, anglers can take the principle of thermal expansion and contraction to solve, in the field to find around the fishing buddies or the shore to pick up a cigarette box, take out the inside of the tinfoil, rolled to the fishing rod card joints, with a lighter evenly baked tinfoil, rotating bake do not bake a place, and then repeat the first method can be retrieved to the fishing rod.

3, the rod super stuck

When the first two ways to solve the problem, take the third approach, with lubricants or vegetable oil, dripping in the card section, static for ten minutes, and then take the first approach, you can effectively retrieve the rod.

Resolution

The reason why the rods are stuck is because the rods are not tightened when they are pulled out, resulting in the rods going into the water, or the force is too strong, resulting in the rods being stuck. The reason for this is the fact that the rod is not pulled tight enough to get into the water, or the force is too great to cause the rod to jam. The rod is usually jammed when the rod is not tightened, in order to avoid jamming, we remember to turn the rod joints to tighten them when the rod is out.

The power does not have to be too great, there is a point to use the downton to solve the card section when you must find a flat place, the stuck two sections from the inside of the rod out, and the following to pad the towel, do not ignore this step because of the convenience of it, it is easy to cause damage to the bottom of the rod, I hope to help the anglers.