On the bridge, eight or nine stories high, what fishing rod is good?

Whether we are hobby table fishing or traditional fishing, we need to put a lot of effort in choosing fishing rods. Facing the diverse waters and fish species in the wild fishing environment, we need to have different choices, such as raft fishing rods, hand rods, casting rods, etc., as well as crucian carp rods for carp fishing and carp rods for carp fishing. High-grade rods, both in terms of quality and tuning are tested to a certain extent, instead, it is the middle and low-grade rods that require us to know how to buy a fishing rod. In this article below, the experience of selecting a fishing rod is divided.

When buying a fishing rod, we should first observe its appearance, including the appearance, the shape of the handle, weight, center of gravity and other important indicators. In terms of appearance, no matter what price, as long as you look at it and don't like it, don't buy it, after all, when you are fishing, you are going to look at it all the time, and secondly, the shape of the handle, the feeling of the grip is also very important. Then the weight and center of gravity of the rod, first of all the weight, its weight determines whether the casting feels comfortable in our hands when casting. The 3.6 meter hand rod, for example, when you pick the rod, pay attention to the carp fishing with the carp rod not to exceed 80 grams, carp rod not to exceed 100 grams, fighting rod not to exceed 120 grams. 3.6 meter hand rod is better to control the center of gravity, we are in the purchase of the rod, directly out of the fishing rod, racked in the forefinger to the center of gravity to find out the center of gravity of the rod, 3.6 meter rod center of gravity point not more than 1/5, 4.5 meter rod not more than 2/9, 5.4 meter rod not more than 2/9, the center of gravity point not more than 2/9, the center of gravity point not more than 2/9, the center of gravity point not more than 2/9. Of course, carp rods and fighting rods are much more difficult to control than carp rods for carp fishing.

When buying a fishing rod, we should pay attention to the best choice of hollow rod tip, which can reduce the weight of the head of the rod, convenient for us to fishing. It should be noted that each section of the tonal change, there must be a gradient, if the first section is particularly soft, the second section is particularly hard, then the second section on the not very easy to break. When we buy fishing rods, we can test each section individually for its tonality, for example, the first section, hold both ends in both hands, bend it with slow and even force, then feel its strength, release the tip and let it bounce straight, feel its elasticity with your hand holding the other end, and then look at the overall deformation of the whole after it bounces back.

Focusing on the second section of the tonal test, we can let it lie in the middle part of the palm of the hand on the four fingers, the thumb pressure to the middle finger, ring finger on top of the position, and then the middle finger, ring finger relaxation, forefinger and pinky finger on top of the pressure of the thumb, to feel the elasticity and hardness of the rod, bear in mind that the rod can not have a hard feeling. If conditions permit, you can put this section of the rod across the thigh surface, palm surface light pressure on both ends, rolling in the same direction, back and forth a few times, feel the rod rolling a circle palm pressure whether there is a change, the best state is no change. The third section, gently hold the two ends, four fingers slightly buckle, thumb outside the top, feel the rod quite and brevet can be.

Additionally, when we buy fishing rods, we can't ignore the details. For example, the rod plug should be tight enough, not too loose, the snake mouth rope should be thick enough and so on. Wooden rod plugs can be processed later, so a little loose is fine, plastic or rubber rod plugs will not. Wooden rod plug processing, directly with 502 glue on all four sides, along the direction of the rod brush glue on it, and then wait for dry, in the sanding with fine yarn to the right. Snakebite rope has to be thick, and the place where it combines with the pole is wrapped in paint, and it has to be even to be good, if not, go home and process it with 502.

In addition to these details that need attention, but also pay attention to the wild fishing section of the closure should be rounded as much as possible, the wall thickness should be uniform, when pulled out of the combination to be tight. Under the section of the closure needs to be smooth and free of impurities, as there is no paint here, but sometimes when making a rod, it may be coated with clear varnish, if it is coated to a large area, then it is necessary to change the section. A good rod will feel friction in your hand when you pull it out to spin it, and it will become slippery if it is coated with varnish. It is also important that the lower closure wall thickness is even. After you buy the rod, it is best to round off the lower closure of each section to prevent snagging. Then you should pull out each section of the rod to see if there are any impurities in the inner wall, and if it is smooth and free of spots. The material of the lost hand ring is also important to see if it will rust, if the threads are even, if it will sting when you screw it on, and if there is any shock absorbing rubber or sponge pads.

Of course, the rod will certainly have its own rod bag, we can not forget to look at the quality of the rod bag when shopping for fishing rods, after all, from this aspect can also be seen on the quality of the rod manufacturers to pay attention to the quality of the rod or not, in general, the rod bag seams are sealed with nylon tape, with a tug of the hand, to see the stitching is not solid can be.