What are the advantages and disadvantages of tower-less water supply?

Advantages of tower-less water supply device: 1, with remarkable economic benefits; 2. Rigorous design; 3, high efficiency and energy saving; 4, simple operation; 5. Small floor space and convenient installation. Disadvantages of water supply without tower: 1, high installation technical requirements; 2. High requirements for water pumps; Tower-less water suppliers are also prone to explosion, because the water pump is too large, which easily leads to the explosion of tower-less water suppliers, and the water pump is too small, which easily leads to the water consumption that users want.

The tower-less water supplier detects the pressure of the pressure tank through the pressure sensor, and the pressure electric signal is recognized and amplified by the automatic control circuit, which controls the action of the contactor, so that the water pump can automatically run and stop according to the pressure change in the pressure tank, thus achieving the purpose of automatic water supply.

The working process of the tower-less water supplier is to start the water pump and inject water into the pressure tank through the check valve, thus increasing the pressure in the tank. When the pressure reaches the set upper pressure limit, the automatic pressure controller automatically turns off the water pump to stop running. Because the internal pressure of the tower-less water supplier is higher than that of the water supply network, it can automatically reduce the pressure and supply water. When the pressure drops to the lower limit of the set pressure, the water pump is automatically controlled to start, and water is automatically injected into the water supply tank, and so on, so that the tower-less water supplier can continuously supply water and run automatically.

Equipment debugging:

1, the equipment foundation scale shall be constructed according to the foundation drawing provided by the manufacturer, and its orientation and specifications shall meet the engineering design and the "Quality Requirements for Equipment Foundation Scale and Orientation" in TJ23 1.

2. After the equipment is in place, level it with a spirit level, and its vertical and horizontal levelness should be less than 0.65438 0%.

3. After leveling the equipment, the foundation shall be grouted with expanded cement for the second time, and piping shall be carried out after 24 hours of protection.

4. After wiring the motor, confirm the rotation direction to ensure that it is consistent with the standard arrow * * *.